mxpxpxpx

I am interested in getting 2. Where can I get them? Thank you

Hello, I recently purchased a Mark III that came with 3 controllers. One of them did not work. I took it apart and nothing looks out if the ordinary. I cleaned it and polished the contacts. The only other things I can think of is the cord is bad, the db9 connection is faulty, or I need to resodder the wires on the pc. All the wires are seem to be soddered and not loose. What should my next move be? I was aware the controller was broken when I bought the Mark III. Thanks for all the help.

Hello I recently had my Game Gear modded with a new LCD screen from McWill and also VGA out. I have also seen where people have added 2 controller ports for either Genesis or Master System comtrollers. I was wondering if any one out there does this kind of mod? I'd like to get it done if at all possible. Thanks

Sorry for all the responses. I kept getting errors and thought it did not post.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

Thanks again for the response. I have no idea what a broken solder point looks like. Everything looks good on the circuit board. I have a solder gun and can try to repair it. Thanks again.

My friend found his Sega Master System in his attic (it has been there for a long time). I can not get it to read cartridges, cards work. It turns on and hang on, safari hunt works. I can also do the hidden maze. It just seems to be the cartridge slot. Also the controller ports seem broken. I have to hold the connection down to get the controller to work. I have tried all his games and controllers on my working SMS and they work fine. I also cleaned the cartridge slot with a credit card cleaning pad. Any help would be great. Thanks Matthew.