cowdog360

Got mine as well. Fantastic packaging and design! Thanks again!

Sign me up for one as well. Thanks!

So I'm working on a Lynx II, installed the McWill screen. most of the time when it starts up, I get the static screen that comes up, but it just hands there. If I power it off/on again right away, it works properly. Any ideas why the initial power up does that? Am i looking at bad RAM or Suzy here? Thanks!

I ordered one as well, will there be any confirmation e-mails or shipping updates? Thanks!

I'll be starting back up on the upgrades this month!

Interesting, I like the crowbar diode across C41. Will have to expriment with that one. And yes, Q11/12 is pretty critical. Looks like the older one I was sugesting is gone now. I've starting using AOD514's https://www.digikey.com/product-detail/en/alpha-omega-semiconductor-inc/AOD514/785-1357-1-ND/3060919 The nice thing about this MOSFET is that the RDS(on) is lower, and the on resistance is much lower (about 46X!), meaning less heat, lower battery usage, more efficient!

I like the install you did with the wires rather than using the old LCD connector.. where did you find pinouts/instructions for those? Thanks!

Put me down for this too.

I'm now using a 2SK2231 MOSFET. Modern, more available, a LOT more efficient.. burns less power.

Karri, you also need to take into consideration if you're using anything other than a 1N5991b zener, that you need to change the R74 resistor to allow enough current to breakdown the zener to get the 5V regulation. If you don't, you'll find that your Lynx will only be getting like 4.3 - 4.5V instead of 4.7 -5. Some lynxes handle it better than others. I just have a stash of old 1N5991B's that I'm using (no resistor mod needed), but I've also used the 1N5229 zener and changed R74 from 120Ohms to 30ohms.

That's why I'm working on some designs for an improved power system that can be fairly easily installed... soon!

I'll also talk to my engineer buddy. Maybe we can just have one board that has charging, boost and power latch. Sent from my SAMSUNG-SM-G935A using Tapatalk

They being me? Yeah I plan on it, I've been so busy lately with work I haven't had a chance, but will soon. Most likely this is where I'll put it: http://nwretrorepair.com/?page_id=34

No problem, if you need any help with your build let me know. I'll be posting my instructions, scripts, etc on how it all works.

I pulled mine off the board, but I use a Hakko FR-300 desoldering gun, so it just fell out no problems. The glue is innovative though! You can get a replacement connector here: http://www.digikey.com/product-detail/en/molex-connector-corporation/0039532145/WM2861-ND/2405232 I'll try to get a write-up of everything here shortly. I'm also in the process of designing a PCB that plugs into the PI's GPIO port and has the lynx flex connector soldered on it, audio DAC, safe shutdown circuit, and will utilize the ON/OFF buttons correctly. Since the Pi Zero W dropped today, that's what I'll use to test it with.