shaggyneo

I appreciate the answers. I'm just going to ebay it for parts. I just don't have the free time to try to figure it out.

Power output on the psu's checks out. It's really driving me crazy.

My Amiga CD32 just quit fully powering on. I was playing Chaos Engine and it loaded a level with garbled graphics so I reset it. The power light comes on but it is really dim and no sound or picture. I have recapped it with ceramic caps and replaced the u14 voltage detector with no change. I have the original power supply and a new replacement unit I got from Germany and both have the same result. Does anyone have any ideas of what to try next or a place I can send it for repair? I appreciate any help. Thanks.

Has anyone tried the VCS modern controller? I can't get it to work. It acts like it's connected but the buttons don't do anything. I've tried a couple of configurations and no change. I got my 8bitdo controller working but I really want to get the VCS pad working.

I'm definitely interested in getting one.

Got mine. Can't wait.

I'd definitely like one of each in black. They look amazing.

I really appreciate all of the help. Upon closer inspection I did find some corrosion on a couple of the pins on u17 and u30. After using some ipa and a soft toothbrush to clean it up a bit I am now getting just a black screen. It seems like it is being held in reset. My friend got this unit traded into his shop and he asked me to look at it for him. It is getting beyond what I am want to dive into as a favor so I am just going to give it back. It was known as red screen when he took it in so it was a gamble to start with. Again I really appreciate all of the help.

I have a Jaguar I am trying to figure out what is causing the red screen of death. The cart slot seems to be fine. I inserted a blank cart PCB and tested the connection to the bottom of the motherboard and everything has continuity. All of the caps seem fine and I tried a new bios chip. Every game I try goes to a red screen except my skunkboard. The skunk works perfectly with any game I flash to it. I'm out of ideas. Does anyone have any experience with anything else causing the red screen? Thanks in advance for your time.

I love CRT's for retro consoles. I have 3 in my main game room setup. I have more in storage just because I can't resist them.

pm sent

I ended up taking the usb ports off of mine and putting it a standard cart shell with a custom label. Put a micro usb port on the top of the cart to connect to my PC.

I appreciate the advice. I'm going to see if I can find the chips and replace them. Thanks again.

I have a strange video issue with one of my Jaguar consoles. When it is connected through s-video or composite video it looks like a rave is happening on the screen. When I connect it through scart it looks fine. My other console works fine connected with the same cables to the same TV. I added a video showing what I'm talking about as well as a video of the other console connected with the same cables. Any ideas what could be causing this issue? I checked the board and nothing jumped out at me. Any help would be appreciated, thanks. 20190707_152556000_iOS.MOV 20190707_152638000_iOS.MOV

My Atari has them in their ebay store as well. https://www.ebay.com/itm/Atari-Jaguar-Replacement-Cartridge-Connector-ONE-only-NEW-Original/143164414633?hash=item2155439aa9:g:BPAAAOSwfl1cgwGX