Jump to content

Sparkoids

Members
  • Posts

    20
  • Joined

  • Last visited

Recent Profile Visitors

1,948 profile views

Sparkoids's Achievements

Space Invader

Space Invader (2/9)

1

Reputation

  1. I can confirm this mod works perfectly on a PAL Rev D Colecovision board. Since I have the VGA F-18A mod I had to put. an extra socket on the video processor to clear the raised RAM in it's sockets
  2. It won't be because Matthew is (I presume) a 60Hz PSU..
  3. The 10uf cap does help make the video output reliable in that it boots to the VGA screen every time instead of it being hit and miss. It is the actual output once Matthew's board is running when you select and try to play the game. The issue is in the Colecovision itself....
  4. OK if it's not the BIOS then is it the 50Hz output for PAL / SECAM TV signal? Both run at 50Hz instead of 60Hz. At some point the signal surely has to be buffered and dumped to the screen (assuming the motherboard crystals are the same). Just a thought....
  5. Ok the BIOS is removed. (Kapton tape around device, preheated the board then removed it with a selective wave solder machine - fitted socket, tested and the BIOS still works). Does anyone have an actual PAL dump of the BIOS for me to check please? My programmer can't read the TMS4764 or NEC D2364 device :-{ Adaptor to follow tomorrow or Wednesday. Thanks for the help Alex_79....
  6. Hi guys, I have tried two Coleco boards now to try and get the F18A VGA adaptor working to no avail. It seems that unfortunately the adaptor doesn't work on European Colecovisions. So I am trying to swap the PAL bios out of the unit for a "No Delay" version which someone on this fine forum said would help. However after getting the eproms ordered it seems the 27C64 is a 28 pin device and I just assumed the chip on the board was the same but it isn't unfortunately :-{ Worse I cannot find a data sheet for the 24 pin TMS4764NL prom anywhere. Has anyone got a data sheet for the device please so I can check the pinout and has anyone actually done a BIOS swap on a PAL Colecovision? Here's hoping and thanks in advance... James :-}
  7. Hi Towmater. What makes you think the bios would make a difference on a PAL machine? Without any evidence at all I can only conclude that it must be the BIOS since there is no other difference in the machines except the PAL ones run at 50 not 60Hz. I am quite prepared to give the BIOS swap a shot I'm that desperate!!
  8. I am in the same position as omf here and can confirm that on two different PAL UK Colecovisions (soon to be three when I dig a spare one out I have) do not work correctly with the F-18A but I believe that it is to do with the bios somehow. I have tried the cap mod on both boards to no avail. The board designer and manufacturer (Matthew) is a first class chap and has been very helpful so far. Does anyone know if the F-18A has ever been successfully tested on a PAL Colecovision?
  9. This looks fantastic. Why not use as much surface mount as you can or (preferably) have dual thruhole / smt tracks on the board? It would easily be possible judging but the size of the PCB. I get that you are prototyping which is fine but if the F-18 is due to be possibly directly mounted on your board then it would make a lot of sense. Just a thought. Great work either way!
  10. OK it *has* to be the F-18 I'm afraid - on the games that do play they hang after a certain time but on the RF/AV they are fine :-{ Thanks for all the help anyway....
  11. OK it is the F-18 or something related to it that is causing the issue. Please ignore my previous post re RAM etc. I just removed the F-18 and soldered the RF modulator back to the board (they are separate on PAL versions). I can now run everything from the SD cart perfectly in terrible RF. Nothing hangs and everything runs correctly. Sooooooo... What is the value of the cap at C106 please? Mine is so old and green in colour (which I assume denotes a tant) I can't read the legend off it? Thanks in advance. I have 5v RAM at the ready if required.... This thing is going to work.... :-}
  12. It is still a bit glitchy unfortunately so I will get onto C106 next - that describes exactly what is happening - the black screen bit. I also have an idea that it may be RAM related. If I leave Donkey Kong on the blue selection screen then it worked sometimes and not others depending on how long before I press start. There is also a graphics glitch that occurs in different places on different games - like 4 pixels in a line which are a different colour. Here is the pic of Donkey Kong with the blue "line" in his Kong's head. That is on an original cart. Space Invaders Part 2 still crashes / hangs in the same place everytime leading me to believe a call is being made and the right answer is not getting back OR the 60Hz from the F-18 is referencing the bios re the NTSC/PAL thing. When it crashes the console needs to be power cycled since the reset won't work. Either way things are moving forward and some games (like Burgertime) are fully playable from the Atarimax SD card. I have even emailed Steve at Atarimax to make sure I have the latest drivers for that device as well. I'm going to fix this damn thing if it kills me! Thanks for the help...
  13. Ok the 10 microfarad 50 volt caps arrived and Donkey Kong nows runs correctly!! I am still seeing crash / hang on the Space Invaders Collection running off the Atarimax SD cart but will need to check with the original cart from home. I am sold on this F-18 - the graphics with scanlines are stunning. Despite some of the games not checking for the PAL/NTSC, 50/60Hz flag in the bios I am not convinced running the PAL 50Hz console at 60Hz via the F-18 isn't responsible for the crash so I'm going to blow some eproms with various bioses and see if it's that. The C3 cap worked OK. A CR network change to delay the reset timing I assume but whats with the tant at C106?
  14. Thanks Tursi. I'm going to order the proper cap. The console reset does not work on Donkey Kong on black screen crash - I need to meter every connection form the removed VDU. Thanks for the help all :-}
×
×
  • Create New...