Markk

Hello “reifsnyderb” Thank you for the answer. Of course you should Everything works before it is made available to the public. I can understand that. I'm looking forward to it, and Thank you again for your great work on this project. greetings Mark

Hello I've been following this thread for over a year. I also had the circuit boards made from the first ones Layouts that “kenames99” released here. Thank you for that. Since then I have been following the many prototypes and memory cards etc. from "reifsnyderb" with interest. Now my question is, will any of this be released to the general public or can you buy it at some point? It would be a shame if you had to do all the work comes to nothing. (Translated from German with google) greetings Mark

Hi, My files are identical to yours. I saved them with Minipro Programmer in Intel Hex format. Should work. DataMemo_TL866A_V1.2.HEX CodeMemo_TL866A_V1.2.HEX

Hi Michael, Have tried your new firmware file, and after I they had adjusted in CodeMemo and DataMemo for the TL866A Burner and software Miniprog v6.85, it runs wonderfully. I took the HxD program for splitting. If you don't mind would I upload the files here? greetings Mark (Google Translator)

@mytek Thanks for the answer. Mark

Hello Mytek, I recreated your S-Drive, but it works not.It doesn't do anything.The Atmega 328P burns I use my TL866A. My question about this is, does the code come in "Code Memo" or "Data Memo"? The software is MiniPro v6.85 greetings Mark (Google translator)

One for me,Please

1. davidcalgary29 - 1 cart 2. xrbrevin - 1 cart 3. skriegel - 2 carts 4. Marius - 2 carts 5. brenski - 1 cart 6. AtariSociety - 1 cart 7. Mathy - 2 carts 8. Haightc - 1 cart 9. Markk - 1 cart

Hello Is there an eagle file from atariduino PCB? Greetings Mark

I'm interested in one piece gruss Mark

Hallo Jürgen Ich würde 1 nehmen gruss Mark

Hello Simius, 1 for me, please! Thanks Markk