klrw111-78

Thank you very much!! Looks great to me.

Yes, please scan it even if there is no schematic.

I want to repair a non-working card and was hoping to find a schematic somewhere

I’m looking for a scan of a Myarc RS 232 manual. Looked on WHtech and others but did’t find anything. Found an old card and need info. Anyone have one available to post? Thanks

A quick visual scan of the CYC pdf in the tigercub directory appears to have the author names listed in the description of each disk. If that helps

Used the log option and loaded mame. I then started changing the slot options to see if it made any difference. My mame.sh script launches with a -gromport multi option with only -cart1 designated. I usually just use the UI to add another cart if I want to change. This has never caused an issue before. When doing this with the FCMD rpk, TI boots as shown in the previous png. If I change to -gromport single with the FCMD rpk everything works. error.log

I get the following with a flashing cursor. No keyed input shows on screen

On my MacBookPro with ver 0.227 SDL MAME, the JS99ER-FCMD.RPK will load, display banner, and beep, but keypresses yield nothing on the screen or response. Just as an FYI.

Gave up working with WINE when I upgraded to Catalina. The 1TB OWC SSD I installed in the 2013 MacBook Pro doesn’t work with boot camp. Found that out after buying a Win10 license. Sent from my iPad using Tapatalk

My comments about the rpk are related to the MAME. I am no MAME expert by any means. It is the only emulator that runs on my MAC without a dual boot installation. Just saw the rpk in the latest zip and thought I’d check it out. Sent from my iPad using Tapatalk

I have a SAMS card in slot 2, IDE in Slot 6, and Corcomp in 8. When I load FCMD, the system reboots with nothing but TI basic in the menu

If you load the 1.15 version rpk as a cart in MAME ver 2.27 should you get a choice for FCMD as a menu item on the TI start menu? Sent from my iPad using Tapatalk

Thanks much. I don't really plan to use all the storage. I'm a retired EE so I enjoy building some of the newer versions of cards that I could only dream about when I had a TI back in the 80's. Although one I card that I did buy at the time (CorComp DSDD disk controller) won't be coming around again.

I decided to do some experimentation and wanted to report my observations in case anyone might be interested. My system has the following in the PEB: SAMS, TI FDC 80-TRKmod, TI RS232 with HDX, HRD4000B with 8MB, TIPI, and IDE. I had installed FC 0.9 on the FG99 a while back and have been using for a while. The IDE was set with CRU 1000, HRD400B with CRU 1200, TIPI with CRU 1400. The DSK and DSK1 emulation was off on IDE and HRD4000B. I upgraded FC to 1.1 and 1.2 failed to recognize the HRD4000B, but other software worked fine. I went back to FC 0M worked fine all cards and all disks worked with it. I decided to swap the CRUs on the IDE and HRD4000B and tried FC 1.3. FC 1.3 recognized and worked with the HRD4000B and the IDE but stopped recognizing TIPI and HDX. It would not take "cd" or "dir" commands to 1400.DSK4, TIPI or 1300.HDX1 or HDX1. Changed CRU on TIPI to 1200 and IDE to 1400. After the change FC recognized HRD and TIPI but not HDX1 or IDE. Changed IDE back to 1200 TIPI to 1800 and tried again. FC recognized HRD and IDE but not HDX1 or TIPI. Pulled the TIPI card and restarted. FC now recognized all remaining cards and devices. The only DSK mapped on TIPI was DSK4 to "."

Ok, it must be something with my particular setup. I am using ROS 842c and I have set POWERUP to "N" on HRZN. Will stick to ver 0M.