Hi,
I picked up a used "Vader" 2600 off of ebay. I've narrowed an issue down to the left controller port. The regular Atari joystick works fine, but not when I plug in a set of paddles. The issue seems to be with Paddle 1 (or whatever you would refer to it as). The button works, but I get no movement out of the paddle. Paddle 2 works fine plugged into the left controller port. Both paddles work as I've tested them with Warlords on the right controller port. I'm thinking it may be a dirty connector or worse a bad solder joint.
I figured before I open it up and do anything I would check in here to see if anyone else has had this issue.
Thank you,
Mathew