patarik

Impressive

Fascinating... NitrOS-9 in 8-bit Atari? http://hackaday.com/2012/04/04/giving-an-old-atari-computer-a-much-needed-upgrade/#more-70904 http://liber809.blogspot.com/

And what about something like HEXEN?

Superior work!!!! Thanx and pls continue with the project.

[quote name=Sub(Function()' date='Fri Apr 2, 2010 12:16 PM' timestamp='1270224983' post='1979113] What you really want to try everything For games all you really need is a joystick and a TV/Monitor If you want better video and sound (and who wouldn't) then you need a TV with a scart input. I use a 4:3 LG TV/Monitor. for sound any set of PC speakers should do there are two RCA jacks on the back of the machine that will plug in to the speakers or a stereo. You may need an adapter if the speakers take a jack plug. When/if you get around to development then you may want to use hires mode. for this you can try and find an atari monochrome monitor. I have an ST to VGA adapter cable. This plugs the ST video to in to any standard VGA PC monitor. Next will come mass storage. I would recommend a device called Ultra Satan. This device plugs in to the ASCI port on the back of the STe and uses 1 or 2 SD cards as hard disks. You will need a set of drivers for the "hard disk" HD driver is still sold so should be easy to get. Hope this helps OK, it seem that LCD monitor with analog tuner is suitable for that. What kind of LCD do you use? Works it also with atari 8-bit?

[quote name=Sub(Function()' date='Thu Apr 1, 2010 4:18 AM' timestamp='1270109928' post='1977658] What do you want to use it for? Games, applications, software development... First I want try everything, than do some development.

Hello I am a new in ST. I got a 1040 STe on ebay recently. It is naked STe with mouse. It has 4MB RAM already. What kind of HW upgrades or peripherals should I obtain? I don't have monitor or TV either. What LCD monitor or LCD TV can you suggest me? Thanks for the advise.

What version of Vanish Oxi Action should I use? With or without chlorine?

How exactly works chip in Assault force 3-D cartridge? In Altirra emulator source code is written: //0,1,2 are data regs, 3 is command/status. // // Command 1, division: // reg3 = 1 // reg1 (hi) reg2 (lo) / reg0 = reg2 (res), reg1 (remainder). // // If there's error, status is 1, otherwise status is 0. // // Command 2, multiplication: // reg3 = 2 // reg2 * reg0 = reg1 (hi), reg2 (lo). Was there some delay between put input values and got valid results? Is it need to check for status register and only when there is status 1/0, then the result in data regs are valid? Or there was not any delay? In source code of altirra I don't see any code for time delay. I am thinking about my own Math coprocessor, but I think that for time-demand tasks there will be some delay.

Forget It. Use something http://www.wiznet.co.kr/pro_wiz110sr.htm more useful. It will not require software implementation of TCP/IP. Atari 8-bit is very memory sensitive and vaste memory for software TCP/IP is too expensive. This module can be easy connected to SIO through SIO2PC or you can connect it more easily direct to SIO port with http://www.wiznet.co.kr/pro_iin_NM7010B.htm

What are your experiences? How works hardware scaling? Is the image clear and stable for so big diagonal?

It seems very interesting!!! http://www.retrothing.com/2007/08/improved-gamepa.html http://www.play-asia.com/paOS-01-77-1-49-en-70-277b.html

Hmm. I don't know. It is possible to display two horizontal neighbour points, that have really different hue or luminance (and worse different hue and luminance) ? black an white or red and blue? When one of the interlaced screen is GR.9,GR.11? I really need resolution 160x192+ Practically i need only 7 different colors. Remaining 8 are the same only with lower, higher luminance. I was thinking about GR.11 as color screen and GR.15 as screen with luminance mask. But then I can't display neighbour points with different colors (different hue). Thanx for yours answers.

Hmm. OK I'll try it.