Jump to content

sailboat26

New Members
  • Posts

    2
  • Joined

  • Last visited

sailboat26's Achievements

Combat Commando

Combat Commando (1/9)

0

Reputation

  1. Thank you hunter44102 for the info. I configured the card with 4 scsi 2 gig 512k sector partitions using the following scheme: Device 1 0 - 4194303 sectors Device 2 start at 4194304 sectors Device 3 start at 8388608 sectors Device 4 start at 12582911 sectors I am assuming that each scsi id is looked at as a single scsi drive and the sector count starts at zero and goes to the physical end of the drive. The device numbers are the logical partitions.
  2. Hello, I recently purchased a scsi flash drive adapter called the scsi2sd ver.5. It is a small board with a 50 pin scsi connection that supports a secure digital flash card, similar to what cell phones and cameras use. I have written the author and he says that no scsi interface card is needed. My question is how to format a flash drive to read/write data. Since the drive is flash, I am assuming that a low level format is not needed, just partitioning and formatting with mydos or sparta dos. Also, I am not sure what byte size 256 or 512 per sector to use in the formatting. The scsi flash drive is listed here with all the specs: https://store.inertialcomputing.com/SCSI2SD-p/scsi2sd-v5b.htm
×
×
  • Create New...