imacav8r

Is there a mod to power the Fujinet through the SIO port and not need the separate USB power? 130XE. Hope so... hate the extra cable.

NTSC. Any thoughts on the audio?

Thanks for sure! What do you think about moving forward with the incognito install? if it is memory this should fix it. All normal basic things are OK, but there is still an audio hum and i dont get the beeping during a S-drive max load...like a normal disk beep load.

Ha! yes sir. The front slot is rom only. Never had a different card in that slot other than rom.

the only thing i have is a 16K proper Atari ram card, and a 32K ram card from Intec Peripherals Corp. i have tried it with only the 16K card. 16K card in any other slot does not even boot 32K card in first slot does not work does not even boot 4116 chips from IPC card installed on the Atari 16K card does not even boot back to the 16K card with OEM 4116 chips in first slot again works but gives original problem.

dont have a second machine, but i have tried 2 different Antic chips. same issue.

Hello. had a dead machine that needed a Pokey, got that fixed. Now machine boots to normal notepad and ready prompt with Basic cart installed. it works fine. When i try to load a game or anything using graphics the screen goes bad. like it cant get vertical hold, just garbled crap. trying fuji net i get the bar graph fuji net screen clear as a bell. as soon as it goes to the next screen where you supposedly pick wifi source, that is the same garbled mess. going to GR.2 and plotting a single pixel.... that pixel is a % symbol. using the SDrive-Max and selecting the D0 menu gives the options table but the characters are all junk. correct placement, but random characters. loading games from SDrive-max results in the same garbled screen once the game is loaded. i have: changed the CPU card which changes cpu, antic, ctia/gtia changed the rom card removed memory leaving only 16K. basic installed/removed nothing makes any difference. Help!

Yup, You guys were right. got the new Pokey in today and it now works! Thanks for all the input!

Have not tried holding any keys, but yes there is a constant low buzz in the audio.

I have an Incognito board on the way for it.... i would really like to see it work before installing it, but installing it may fix it (new ROM and memory). Big gamble.

Hello, I have acquired an 800 which is not working. It powers on to the standard blue screen, and has the cursor in the upper left, and nothing else. without cartridge there is no 'memo-pad' note. With basic cart installed i dont get a 'ready'. keyboard inputs do nothing. I have tried a new CPU board - same. Re-seated all the socketed chips, de-oxit card edge connectors - same. Any thoughts?

Fujinet with an Incognito board? Does Fujinet play nice when an 800 has an Incognito board installed? Not sure if the drive storage emulation on both devices give issues or? Would love to get one if it will work OK.

Kit is sold. Thanks.

I will sell all listed for $600.

This is what i have: My bill was $898. I would sell for $700 shipped. FYI..... I approached McRorie first about this as i did not want to take away one of his sales. This purchase was originally from him to me, then i had a change of heart. I also have a Sandisk CF card and the cart tunnel print that is included. 1088XEL Main System 1 Option 2A Entire BOM with Green Board 1088XEL Accessories 1 PICStic Allows you to program all of the PIC chips in the 1088XEL (recommended for DIY kits) 1 1088XEL-CF: Allows you to use a CompactFlash card as a hard drive 1 H80 Panel Status Indicator board: Shows VGATE/Stereo/RX/TX indications on custom lid for Real H80 (included with case option) 1 Mouse select board: Engages Mouse options, designed for Realan H80 (included with case option) 1 H80 Joysticks (set) 1 Realan H80 Case & CF backplane: Backplane accommodates access for 1088XEL-CF 1088Video Options 1 Option 10a Sophia Rev C (1536x960 core for 1920x1200 or 1680x1500) Other Options 1 UNOCart