Ok all, I'm having trouble with a six switcher from Taiwan. The picture on it is Razor sharp, however I have barely any sound. There is an audible hum and there is no sound unless I crank the TV all the way up, then it's just soft, but not distorted
I have an atari 7800 that I hook up the same way, using the same games, and it works, so I have been able to figure it is not the Cable, the tv or the connection from the RCA to the coaxial.
Tried 7800 with 2600's cable, sound and picture were clear. (no problems)
Tried a different cable on 2600, same issue.
Issue still there after trying a/b channel switch.
Tried a ferrite choke on the power ad av cord, no difference, sound still barely audible, picture very clear.
I've read between this site and others that came up from a google search that the issue may be a bad cap. I took a picture of the cap and one end is sealed and looks ok. This end however, looks suspicious. This is on the small board that is NOT housed in the heavy metal surround and is on the top left near the on/off switch. (in pictures the switches are to the right of the blue cap)
Do you think this cap may be the issue? It's on its own and looks pretty easy to de-solder and replace. I don't want to toss a unit that looks to otherwise be in perfect shape.
Thanks for any help you may provide!!