Jump to content

mattyv316

Members
  • Posts

    56
  • Joined

  • Last visited

Profile Information

  • Location
    CLE

Recent Profile Visitors

753 profile views

mattyv316's Achievements

Star Raider

Star Raider (3/9)

15

Reputation

  1. If anyone with an original Intellivision or Intelivision II wants it, lmk [FS] RTO cart (5-11under version) with box and manual for original Intellivision and Intellivision II International shipping rates would eat up a good chunk of a refund.
  2. SOLD $150 shipped in USA Technical details of this cart located in this thread RTO - my "production" take on the multicart I am selling this cart because it does not seem to be compatible with the Super Pro System or Sears Super Video Arcade revisions of the Intellivision console. I have confirmed that it does work on the Intellivision II and others have confirmed working on the original Intellivision. Since I cannot use it on my SPS or SSVA, I am re-selling to just get my money back and cover shipping charges. Please PM me with any questions. I have not sold anything in this forum, but my eBay feedback is flawless (ID Mattyv316).
  3. @aotta if you need someone with a Super Pro System or Sears Super Video Arcade, let me know. The 5-11 RTO does not work at all for me on these 2 consoles. I would love to test a PiRTO
  4. I have to agree with @Crash7. I jumped on the chance to support all the hard work, and loved the idea of being able to get a ROM cart for our beloved INTV. Super disappointed to see it abandoned so quickly when it never worked for the 2 systems I use.
  5. I agree with @Crash7 I have a Super Pro System that I am seeing the same behavior on. I cannot even get the rom selection screen to display properly. It shows the same garbled screen as other roms I try to load. My Sears Super Video Arcade can get the rom selection screen to display correctly, but the farthest I can get is only some roms will get to the title screen and then just reset to the title screen when I try to start them (same behavior as @sfish video clip). I do have an Intellivision II that I can get the RTO to work on, but not the SSVA or my SPS, and I have tried many delays.txt values. Another thing to note is that I have tested LTO and Backbit carts on these systems, and both work fine. Has anyone been able to successfully use the RTO on a SSVA or SPS?
  6. @Crash7 I am having similar issues with my Super Pro System, but have not had time to test the delay.txt settings. I thought it was me at first too, but you having the similar problem makes me believe the Super Pro System is the common denominator. I also tried the RTO on my SSVA and I get the game title screen, but just keeps resetting to that when I try to start a game. Like I said, I still need to play around with the delays file
  7. @tanuki Please update my request to 2 controllers and 2 Inty 1 adapters. And thank you for the update. Really looking forward to trying this controller out.
  8. Sorry for my confusion. I was thinking about when you removed the resistors. I remembered it was when you were installing the v3, but forgot it was when you removed the resistors. My bad
  9. Ok, so I had a little time to play around with this more. @the_crayon_king yes changing to Y as sync fixes the weirdness I was seeing on the 5X and OSSC. Orange Peel seems to be working as well as Baked Potato v5 for me now. Thanks for that pointer. As far as my install with Gen 2 pinout, I did a little more testing using Orange Peel and my SCART cables. I have 3 Retro Access scart cables I was testing with. The first was a standard Genesis 2 cable that was converted when I had my first Fed K mod installed. This cable had caps removed and points bridged as well as the resistor shorted so there is no attenuation on the board of the cable. The second cable is a standard, unmodified Genesis 2 scart cable. The third cable was a Genesis 2 cable ordered as a generic RGB mod cable from RA. This basically matches the 8-pin mini din cable they sell for generic RGB mods, but with a 9-pin mini din on the end. Baked Potato and Orange Peel only work with the cable #3. I do not get any video when using cables #1 and #2 (even if I use the resistor bypassed RGB points on OP board). Cable #3 is the cable I have always had hooked up, so to me, I never had an issue using the Crayola mods. I can see why @-^CrossBow^- failed to get video when using the 9-pin at first. It depends on how the cable is setup. Here are a couple pics of the top and bottom of the 3 cables and their boards. @the_crayon_king, I completely understand that you support the 8-pin mini din install. It simplifies the application and removes problems that can be had by using the Genesis 2 mini-din, so I am not posting this info expecting any changes in your mods to accommodate the different 9-pin possibilities. I am just posting this info for anyone that may find it useful or interesting.
  10. @the_crayon_king I moved sync to the Y pad of Orange Peel as suggested and that solved my issue using the HD Retrovision component cable on the OSSC. Thanks for the suggestion. Do you see any problem with me leaving it connected this way?
  11. Yes, I usually have sync from the board go to sync and composite video of the mini-din. That is how I had all my Fred K board wired, so I did the same when I installed all the Crayola mods.
  12. I tested so many combinations, that I do not remember if I tried hitting reset when I saw distortion on the 5x. Will need to re-test with that suggestion, thanks. As for the Baked Potato v5 with HD Retrovision, I did not have any expansion. I just hooked the v5 directly up to the min-din 9 the way I always do and it seemed to work.
×
×
  • Create New...