Evidious

That fixed it! Thanks very much!

I updated the firmware for my 1088XEL and now .ATR files do not show up on my CF Card only .XEX files do. Any help on how to fix this would be great I tried going back to the old firmware and its not working -thanks

Please add me to the purchase list. One Dragonfly cartridge, all options, and burgundy colored case. Thank You.

Rest in peace Curt. Condolences to his family and friends.

Thanks for the feedback everyone

Is it a good idea or bad idea to replace the 12v and 5v regulators with more efficient Switching regulators? I was wonder if anyone had any thought on this

Any information information would be great Karl. The only Information is what I typed in from The .doc files on my US Doubler Disk -Bobby

Sorry,I meant dine out only Scotty,Thanks Mr. Fish,I do have the installation manual. Just no info on the U.S. Doubler. -Bobby

Hi Karl; Thanks for your help! I have the Installation Manual but not the actual operating manual for the U.S. Doubler by ICD As far as i know but i could be wrong it's different than the US Duplicator. -Bobby

Since my job is closed for the next few weeks and the bars are closed and the restaurants are dine in only I have a lot of free time. I could never find the Manual for the US Doubler it's probably out there but I can't find it. So I typed in all the files from the .DOC on the disk. If any one wants to add,correct,proof read, amend, and update it and make a PDF and post it please do. I used notepad++ to type it in US Doubler Manual.txt

any way i can purchase two cases for the controller?

Boxed Disk version Please

both switches up,but it fills the whole screen with A off and B on its a Seiki Monitor/TV , I will try it on a Plain PC Monitor when i get a chance

The green light blinks on my board blinks.Is that ok? Other than that it looks great!

https://hackaday.com/2019/10/24/retro-hardware-plots-again-thanks-to-grbl-and-esp32/?fbclid=IwAR1QohVD1G3qC_Ytg4zeGMhj46INZITnh6gEo-XQL81OMfcMB3YbdE8Hp9E