Roydea6

USE the portable ALT feature to make a couple of ini files example game.ini HDDIDE2.IN THEN make these ini files into destop icons, so when you want just games open the icon for games, if you want SpartaDos x and hard drive use the HDDIDE2 INI icon... and like Keatah suggest just play with the setting until you have something you like.. I don't use Sparta Commander but I do know you have to edit the SC.INI file to change the defaults. and delete any SC.SAV files.

It is usually included in the Zip file installed in the Additiions.atr.

Sorry about that my setup has a COMMAND line and I use it on Pin 7.

You might be able to get handshaking if you test connect your last wire to Pin 7 and/or Pin 9 of the Sio plug.

Very sorry to hear this my older brother also declined somewhat like this for about 4 years now.

DEVICE SPARTA DEVICE SIO DEVICE ATARIDOS DEVICE ULTIME ensure that you have a minimal config.sys and Autoexec.bat

No not necessarily the CF card could be bad or power supply not getting enough voltage to the Side2 .

Indus Master with Super Synchromesh.atr This one announces that it is 2.35i2

Dos XL 2.35.atr Nothing about the i2 part of name..

This is the only one that I remember off hand. 40 OBAGUX

And this one seems to be the last Level for Diamondz 2.0

here is the finishing look of level 38 This seems to be the last Level 40 and level 40 just before completed.

finished Level 36 Now stuck on level 39.

This should be correct. Blue wires are some what hard to see (for me)..

I like this version the best and consider it finished if you can get all the way to Montezuma. Then you only need to power off or press RESET key.

About 4 levels are hard enough that I have to use the freeze code to get them completed. But in general I have been using the freeze code since about level 10.. Spoiler [Hoover over picture to see code for 39] I don't know how to hide a spoiler 2 Days on this level about 5-7 hours. And I still haven't found a useful starting Strategy.. First post in the High Score Club, but I was looking for help.

And extract the EXE rename XEX --- READY If you can search the Forums it is in here CALLED AtrUtil

This disk ATR file that holds your ANT.com file also need to hold your OS.ROM files or on D2: or the SIO2SD executable file to load the on screen file menu of the SD card..

New to me works good for a 16k machine. Lots of carts run okay the flash carts not so much. Looking forward to Jürgen's 400 48/52K with OS/slots.

NO not a 5pin DIN plug.

96 02 80 16 80 00 00 00 00 00 00 00 00 00 00 01 ATR header with last byte being 01 usually Write protects the atr in most emulation. Does this hardware follow this concept??

Hi Jurgen I would like to get one card. Thanx!!

Search and read this thread... http://atariage.com/forums/topic/252237-800xl-rf-module-removal/?hl=%2Brf+%2Bmodule&do=findComment&comment=3515057

With the Wiztronics upgrade I like to use a scrap single wipe socket and cut it down to fit over the pins in the PIA with the wires from the Wiz Kit soldered to the scraped socket pins.

OK I replaced it and it seems to be the same as the one I have. UFLASH XEX 22813 9-12-16 2:38p v1.28 does not seem to have a FIRMWARE slot.