Stormbringer

couldn't you just print them on the side, that way if you have banding it would be vertical. there are a lot of tricks to smooth out 3d prints too.

I want it more for the dust cover aspect. Usually I leave it open when i'm using the drive. I have a 3d printer its just the 3d model I cant make

I could send you my cracked one...

Sorry, I didn't realize I was being unclear. The warpage on MY faceplate was from the center. I got it hot enough to bend it back using a flat surface. I did not touch the ends. I finally got a area to set my stuff up and when I opened the door via the button it just kinda sagged.. The right side that broke off has the spring attached to lift it up. I'll try gorilla glue but was just curious if someone made a 3d model of it at some point

The smoked acrylic swing-up cover. Mine was warped from the center/front.. the arms were fine and that wasn't the alignment issue. There are translucent filaments that can be used for 3d printing.

oh, no... this warped front was resolved years ago... one of the two "arms" that holds the face plate in place cracked. not the front of it... guess I would have thought someone tossed it to in that case..

When mine was out of alignment I carefully (read that Gunstar, I was careful with my stuff!) heated it up with really hot water and a blow dryer. trued it up on a flat surface. I only manipulated the face, not the fragile ends. Guess I'll have to glue it together now since I cant make a 3d model to save my life.

I'm pretty sure the answer is no but did anyone ever make a 3d print of the Indus GT cover that always seems to crack?

Awesome!

6 switch 2600... I've got another UAV in an 800... and two Super Color CPU Card's in both a 400 and another 800. The Revision C and D UAV that I've put in two 2600's both look like the image I supplied earlier using Adventure as an example.

I will when I get a chance. I've clipped the 5 pins of the RF box and that helped out a pretty good deal. I'm leaning on using the S-Video to the Retrotink2x. Maybe I'm expecting too much but the composite looks really bad still.

I got a Retrotink2x and it still does the ghosting/bleeding. Grrrrr

Ive checked my soldering and connections several times and that doesn't seem to be the culprit. if this is just the quality than I understand - at least someone else piped up with the same results. Wish someone who knows the video out intimately knows if this can be addressed or not? yes, the SVIDEO is nice but what the heck devices have that nowadays? I want to bring my 2600 into the livingroom, not stuck on a 14" monitor with svideo.

Not sure I understand " If it's not the cable, then the problem could be that you forgot to remove an inductor somewhere.". Can you elaborate? I did use multiple cables, TV's and a couple of different UAV installs in a 400 and 800 to compare. I used the instructions from:

Please put me down for 2. Duddie, Weren't you working on mylars for the 800?

Not sure I agree. I have two other installs, an 800 and 400 that look sharp. I have another 800 with the same effect.

If you look on every edge of every object you will see another slightly offset image. There are no "alignment controls" as this is composite in to TV's. I've got other UAV's in various forms for my 400s and 800s. I will admit one of my 800's does the same thing but the others dont, however.

I was having issues earlier with a heavy 6 and the UAV r.C and I posted a pic of Adventure earlier but got ignored (its ok, happens to me in life). So I ended up getting a UAV r.D and im getting the same issues. You can see at the edges of everything its all... shifted, offset, unaligned ?!?!? I don't know what to call it but heres a pic. I have tried 3 different TV's using the composite with the same effect. I've put a socket over the 4050 and followed all the directions I could find here. Any ideas or should I post this in another thread? OH, I also need at least one or two of those audio boards!

Woohoo!!!! finally was able to order a handful. Cant wait to check them out. Anyone use them with the replacement 3d stick? https://www.thingiverse.com/thing:1112778

yeah, its been too long since ive seen the movie... but any time someone says 2 weeks - well, ya know! So to my chagrin how do I get on the list for these things I thought you mentioned something on your site to alert when in stock but I didn't see it. I'd like at least 4 of em. Thanks!

I agree about the SD card support. I'd actually prefer to keep it CF. I do have a CF to SD adapter in one of my incognito's so I can run my wifi SD. (I can copy files to/from the SD card wireless from my PC!) all this works easily with a CF adapter I bought for $5. I bought two incognito's when they came out... I'd buy another two if they are ever made again! Please do another run! We need one for every 800 (and 400, dammit!)

Atari 830 Some unknown Hayes compatible * questions on this. Hayes 2400 US Robotics 14.4 - 56k external various ISA/PCI modems in the PC world * So... this awesome, white external modem. I think it was 1200. It had a detachable face that would store your phone numbers in it... it had a display that you could select a number to dial/save, etc. Anyone ever see something like this before? I think the idea was that you stored all your numbers and you can pop the display into another modem like it and have access to all your numbers.

That is so cool! I never knew

Just purchased my copy!!!! wo0t!