pajero_pn

- searching: empty directory = suspension of the operation atari (exactly: cartridge suspended) - removing the SD card from the slot = suspension of the operation atari (exactly: cartridge suspended) - updating firmware (shift+option+U): before click start - you can not cancel

TMP: thank you for help instruction, if the cartridge was interrupted programming 1. remove cart from the shell 2. plug unbricker into the cart 3. plug cart into atari 4. turn on atari 5. plug unbricker into usb (computer or usb charger) 6. wait until it stops blinking 7. press reset on atari after that, avgcart menu should come up and you should be able to start the update again (unbricker will fix it just temporarily, you need to run the update again to program the flash)

...

Under the yellow color is difficult to see copper

Thank you for your answer. We follow the topic in Poland http://www.atari.org.pl/forum/viewtopic.php?pid=233963#p233963

Can I ask for a list. Devices tested and compatible with XEL VBXE yes SIDE2 yes KMK +IDE ? http://atariki.krap.pl/index.php/IDE_Plus Rapidus maybe in future ? Sio2SD yes Turbo Freezer ? http://www.horus.com/~hias/freezer/turbo-freezer-2011/

Schema and gerber will be opensource?

Only demo https://github.com/lybrown/tiles

Paisu or Pasiu

Is it working SDX ? It's on U1MB....

From pokey socket (left or right): D0-7, A0-1 (maybe A2-3), R/W, Phi2 Outside: +12V power supply AD7226, but you can give 5V (covox plays weaker) - look Candle IOboard http://spiflash.org/node/8 Adress line from chip select decoding 74HCT138: pin 13 ($D2xx) or pin 7 or 9 ($D6xx / $D7xx) For address precision you can add line A7 (as ONE) nad A6 (as ZERO) = example as trimming $D280-D2BF Or another: A4,A5.... look Evie http://atariki.krap.pl/index.php/Evie Exit: Gnd, Left, Right and mix to Mono. I've already done Covox extension. But, first: i prefer to test it. I order parts uCovox was first created. With the help of Candle. Then his experience went to SimpleStereo Sorry my English is bad.

ATR = mod file and NEO tracker http://ftp.pigwa.net/stuff/projects/uCovox/Soft%20and%20MODs/uCovox_Soft_and_MODs.zip

Hello For your project (and more) I have a covox add-on. One cable = address selection Will it be possible? Buy only the motherboard? Converting Schema: ExpressPCB to KiCAD? Possible? Regards Ps. for covox player see http://atariage.com/forums/topic/264125-best-mod-player/?p=3735171

Dark-AKI project http://ftp.pigwa.net/stuff/projects/AKI/source/ and keyboard http://atariage.com/forums/topic/137644-pajero-mad-team-stereo-and-1mb-upgrades/?do=findComment&comment=1661518

Antic - AMI 8940MFF CO21698-01 ©Atari 1983 PHILIPPHINES

Other Antic and the same error, the exchange did not give Is someone you already checked? PostCard.XEX On your Atari + VBXE ?

Watch videos from the first post. vbxe_postcard_a.mkv 00:00:30 to 00:00:50 = 20 seconds Antic warm up, and I have errors

VBXE 2.0 Electron & Candle Interface ident: 0x71 FX v.1.26 RAMBO My photography - no Rapidus on board. And bug of the same

Config - 130XE - VBXE 2.0 FX v.1.26 RAMBO - Rapidus or 6502 (it does not matter) Test: - 3 different GTIA (this is not BUG-GTIA) - added patch GTIA-fix = without improving the picture PostCart by Rocky 6502+VBXE and Antic+GTIAfix

It may be useful DosXE extractor v1.2 beta.zip

Totality: great job Question: Debugging. Selected 6502. BRK command is a two byte? How to change it?

New option debugger: overwrite the same interrupt as error example: - is interrupt - program calls the same interrupt - error

Whether it is the box (cover)?

Cool effect. Blur screen. The debugger enabled. Still pressed F10 or F11. Only if the option VBXE is enabled

The current version of the firmware is 3.1 RC_02 (This is only a test version. This is not the final version !!!) Bug fix: - LoaderXEX: fixed, spoiled bits of offset, and he lost $ ad57 bytes - LoaderXEX: start address of the first block is written to dosable RUNADR and DOSVEC - LoaderXEX: set $ 9 = 1 and $ 244 = 0 I'm sorry, my English is low SETUP and K1-K4 eng.pdf