Marsupilami

Hello, i'm looking for a RA-3-9600 to repair my INTV, does anyone have an extra one or a good supplier on the web ? Thanks

Hello @all, I spotted a 800, a 800xl, a 1050 and Syncalc in a Jackie chan movie from 1985 (Police Story) 😀 I don't think anyone had discovered this before (but it would be strange after all this time), so I'm sharing 😁 Edit : Found this, incomplete but already discovered anyway http://www.starringthecomputer.com/feature.html?f=252

Yes, good idea @Gunstar In fact i did with what i had in my drawers But it's still a work in progress. One of my relationships is trying to build an adapter card like the Simius one but with an HDMI output instead of the DVI output (It seems it's too hard to do with a microhdmi directly on the card). Once done i think i'll use this kind of micro HDMI adapter indeed (with a male HDMI / male MicroHDMI cable). I hope i'll then be able to put the RF shield back in place to avoid having too much noises with the WIFI signal of my fujinet And for the sound output i think i'll build a male 5 pin DIN (from the monitor port) to a female 2.5 jack. Or maybe i'll use the RF hole for the Jack and the micro HDMI cables. But in that case i'll have to take sound from the MB on the monitor port.

@Gunstar Because with a Mini HDMI the problem is the same : it's too big. A Micro HDMI will work, but i haven't found a DVI-to-MicroHDMI online.

I didn't want to modify my 800xl case so this is how i did it I'd love to see a micro hdmi output for the V3 maybe as an option ? (because the micro hdmi cable could go through the old RF hole).

Thanks @rensoup and @TIX for your answer Keep on doing such an awesome job on this game within the free remaining time you may have and i know it's something rarest with the covid stuff.

Hi, no pressure, I admire the work already done. I just wonder if Santa Claus will bring a new version in his hood for Xmas

According to a pm i had, Simius said : "the boards are intended only for PAL or NTSC machines. NOT for the SECAM."

Scary isn't it ? You can also buy this adapter instead : https://lotharek.pl/productdetail.php?id=309

Hello folks, I was trying some randoms .car files until i had this error...?

Not as beautiful as the real one but until Lotharek's return it will be enough + I added some space in the shell for the push button.

Thanks, yes i could indeed..but i wanted to know if the model for Side3 was already available (without having to modify an existing shell model). I'll wait until Lotharek is back then

Yes i did it yesterday...but He took loooong vacations

Yes, It work perfectly (fortunately).

Hello folks, My Side3 was crushed by the carrier 😭 Is there a .STL file somewhere for my 3D printer ? Thanks.

This is the cable sold by Lotharek and other resellers. There is a warning on the Lotharek product page. But as this cable was supplied with the CosmosEx, I was not aware of the problem. There is also this item on Thingiverse that may be useful (thanks to Radovan for the information) : https://www.thingiverse.com/thing:3864726

I can't edit my last post but on the TT the risk is lower since the rear design is different.

Hello, After 3 more hours of research i finally found the solution ! The problem does not come from the CosmosEX but from the design of the ACSI cable! On a MSTE, this cable produces several short circuits if it touches the "serial 2" port. Luckily neither the MSTE nor the ultrasatan burned 😱 The most expensive workaround in the world: a piece of electrical tape 😄 It worked on the STx because there is nothing above the external DMA port. And it worked with my ultrasatan because the cable didn't have the same DMA plug shape! I hope it will be useful, this cable can be dangerous for our MSTE, TT30 and ACSI peripherals. But fortunatelly the fix is easy 😅

Ok thanks for the update. So on a MSTE the CE works as external ACSI but only when you have an internal scsi. Interesting.

Ok thanks. It's set for ACSI internally. If i understand your screenshot : - You're booting with the HDDriver for your internal SCSI2SD but when the Cosmosex disk drivers tries to load you have a "device not found error". So more or less same problem. The difference is that at least the Cosmosex disk drivers tries to load. So it's just a bit better. I don't have the driver loading at all on my side.

You mean yours is working externally on the ACSI port ? In that case well...Maybe. I don't have any internal drives. So no hard disk controller. I have the 8 jumpers installed ont both MB on J402 but that's all. So the ultrasatan could behave differently than the Cosmosex ? According to this https://atari.8bitchip.info/MegaSTEACSI.html it should work.

Hello folks ! I've tested my Cosmosex with my STf, STE, MegaST and it works fine (with the provided ACSI external cable). But i also have 2 MSTE (no HDD inside, TOS 206FR, Floppy, 4mb RAM - see picture). And with these both i cant boot on my CE. I mean it's not detected at all. I also have an Ultrasatan perfectly working on ACSI with all my ST, MST, STE, STF and MSTE (on this picture Sysinfo is loaded from the ultrasatan). I already tried : - to change the IDs but same problem. - to update the Pi, the Firmware. Jookie remotely logged on to it last week but didn't find anything wrong. So i need to understand if it's a bug or if there is a problem with my Ce or with my 2 MSTE. If you have a Cosmosex and an MSTE could you try to boot ont it and tell me if it's ok or not ? Thanks

3 for me please Thanks

Really nice ! I't always awesome to see new games for our ST. I hope you'll be able to optimize it for ST, STE and...the Falcon 😍 (another challenge). But...Maybe you should translate the first word of the title in french and see what it means (sorry about that but associated with the "Icarus rising" or the "is coming"...well ) Again, my apologies, i'm going back to drive my Audi "etron" (same marketing problem 😁)...

Hi, i'm interested by : Atari 65XE - Arabic 65XEN nijem 1 and 2 (both) + Shipping to France. Both are working ? Thanks