Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store  

Marsupilami

Members
 View Profile  See their activity

  • Content Count

    186

  • Joined

  • Last visited

Posts posted by Marsupilami

  3. Posted

    1 hour ago, Gunstar said:

    Sorry, I meant micro HDMI, like you said... how about an HDMI-to-MicroHDMI and plug that into the DVI-to-HDMI adapter you already have?

    EUSTAK-Micro-HDMI-Adapter-HDMI-Male-Type-A-to-Micro-HDMI-Female-Type-D-Gold-Plated.jpg

    Yes, good idea @Gunstar
    In fact i did with what i had in my drawers :) But it's still a work in progress.
    One of my relationships is trying to build an adapter card like the Simius one but with an HDMI output instead of the DVI output (It seems it's too hard to do with a microhdmi directly on the card). Once done i think i'll use this kind of micro HDMI adapter indeed (with a male HDMI / male MicroHDMI cable). I hope i'll then be able to put the RF shield back in place to avoid having too much noises with the WIFI signal of my fujinet :) 

     

    And for the sound output i think i'll build a male 5 pin DIN (from the monitor port) to a female 2.5 jack. Or maybe i'll use the RF hole for the Jack and the micro HDMI cables. But in that case i'll have to take sound from the MB on the monitor port.

    • Like 1

  8. Posted

    17 hours ago, flashjazzcat said:

    Forgive me if I already asked this question of the prior version or it has been answered elsewhere, but does Sophia 2 support SECAM Ataris?

     

    According to a pm i had, Simius said : "the boards are intended only for PAL or NTSC machines. NOT for the SECAM."

     

    • Thanks 1

  12. Posted

    29 minutes ago, candle said:

    IGS to STL conversion can be done with FreeCAD, also you can make all nessesary modifications there.

     

    Thanks, yes i could indeed..but i wanted to know if the model for Side3 was already available (without having to modify an existing shell model).

    I'll wait until Lotharek is back then :)

  18. Posted · Edited by Marsupilami

    Hello,

    After 3 more hours of research i finally found the solution !
    The problem does not come from the CosmosEX but from the design of the ACSI cable!
    On a MSTE, this cable produces several short circuits if it touches the "serial 2" port.
    Luckily neither the MSTE nor the ultrasatan burned 😱
    922319388_Ultrasatan-ACSIcableshortcut.thumb.jpg.3bf153be8850318bbaeb61986d5cec62.jpg

     

    The most expensive workaround in the world: a piece of electrical tape  😄
    1332507030_Thefix.thumb.jpg.8a6a18e281ef652376d86e4cd8c24d5c.jpg

    It worked on the STx because there is nothing above the external DMA port.
    1026957415_whyitworkedontheSTE-STF.thumb.jpg.2d86ff0eda33099acbc76b7ae5ae0910.jpg

    And it worked with my ultrasatan because the cable didn't have the same DMA plug shape!
    2110285558_OLDACSIcableprovidedwithUltraSatan.thumb.jpg.0f0e2f46b99dd0da6b7717df6050d8bb.jpg

     

    I hope it will be useful, this cable can be dangerous for our MSTE, TT30 and ACSI peripherals. But fortunatelly the fix is easy 😅

    • Like 2

  20. Posted

    Ok thanks.

    It's set for ACSI internally. 

    If i understand your screenshot :

    - You're booting with the HDDriver for your internal SCSI2SD but when the Cosmosex disk drivers tries to load you have a "device not found error".

    So more or less same problem. The difference is that at least the Cosmosex disk drivers tries to load.

    So it's just a bit better. I don't have the driver loading at all on my side.

     

  21. Posted · Edited by Marsupilami

    58 minutes ago, tuf said:

    I've used mine with my MSTE - I do have internal SCSI drives tho.  Could it be a termination thing?

    You mean yours is working externally on the ACSI port ?

    In that case well...Maybe.

    I don't have any internal drives. So no hard disk controller. I have the 8 jumpers installed ont both MB on J402 but that's all.

    So the ultrasatan could behave differently than the Cosmosex ?

    According to this https://atari.8bitchip.info/MegaSTEACSI.html it should work.

     

    received_4379503435408231.thumb.jpeg.42669b0157cfddf4b969a00eafdcb0f7.jpegreceived_421621148732295.thumb.jpeg.04edba37b0b89347ba6b4726580e2449.jpeg

  22. Posted

    Hello folks !

     

    I've tested my Cosmosex with my STf, STE, MegaST and it works fine (with the provided ACSI external cable).

    But i also have 2 MSTE (no HDD inside, TOS 206FR, Floppy, 4mb RAM - see picture). And with these both i cant boot on my CE. I mean it's not detected at all.

     

    I also have an Ultrasatan perfectly working on ACSI with all my ST, MST, STE, STF and MSTE (on this picture Sysinfo is loaded from the ultrasatan).

    942673927_20200703_212634(1).thumb.jpg.e84e3595fe931321201be6f4e3597b0a.jpg

     

    I already tried :

    - to change the IDs but same problem.

    - to update the Pi, the Firmware.

     

    Jookie remotely logged on to it last week but didn't find anything wrong.

     

    So i need to understand if it's a bug or if there is a problem with my Ce or with my 2 MSTE.

     

    If you have a Cosmosex and an MSTE could you try to boot ont it and tell me if it's ok or not ?

     

    Thanks

  24. Posted

    Really nice ! :thumbsup: 

    I't always awesome to see new games for our ST.

    I hope you'll be able to optimize it for ST, STE and...the Falcon 😍 (another challenge).


    But...Maybe you should translate the first word of the title in french and see what it means (sorry about that but associated with the "Icarus rising" or the "is coming"...well :) )

    Again, my apologies, i'm going back to drive my Audi "etron" (same marketing problem 😁)...
     

     

     

    • Haha 1
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2021 AtariAge

×
×
  • Create New...