Jump to content

iainjh

Members
  • Content Count

    69
  • Joined

  • Last visited

Community Reputation

8 Neutral

About iainjh

  • Rank
    Star Raider
  1. it was that simple . thank you!
  2. hello I managed, while playing with the options in my sdrive-max, to rotate the screen and mess up the calibration. Two for one.. so that on boot the screen wont respond to any touch how do I reset the sdrive max back to the caibration screen please? did i see somewhere there is a .cfg file? thanks all!
  3. does anyone think this or similar will ever happen?
  4. thanks for help earlier, I still couldnt get it installed via my mac so on went the PC and its done - thanks again for trying!
  5. Hi, yes I have the crosspack. Driver problem then! I suspect it is a 340g, but ... there's no markings. I'll get it installed and will report back. that link didnt work, I'm risking these https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver thanks!
  6. FYI anyone in UK: https://www.ebay.co.uk/itm/Rust-Oleum-Painters-Touch-Aerosol-Spray-Paint-Satin-Gloss-Matt-FREE-RETURNS/391383358967?var=660602590812&hash=item5b20441df7:m:mSjkmeSe72U_WXcbTsRgOqA And B&Q sell the same: https://www.diy.com/search?Ntt=Rust-Oleum+heirloom I'll get a can from B&Q and will report back how that matches. thanks for info, this thread is just what I needed for painting a 3d printed Sdrive.
  7. hi, thanks for reply Yes I also tried that, this is the message I get from the mac script: it seems to fail then continue anyway. How do I know it's completed successfully? OK, here we go ! avrdude: ser_open(): can't open device "/dev/tty.usbserial-1420": Resource busy ioctl("TIOCMGET"): Inappropriate ioctl for device avrdude done. Thank you. Waiting for first flash-stage to finish..... Please wait ! avrdude: ser_open(): can't open device "/dev/tty.usbserial-1420": Resource busy ioctl("TIOCMGET"): Inappropriate ioctl for device avrdude done. Thank you. Done ! logout Saving session... ...copying shared history... ...saving history...truncating history files... ...completed. thanks again!
  8. hello, maybe wrong place for this query but, having issue flashing the eeprom.bin to my uno. Has anyone got past this error before? mac: cd /dev ls seems to show the uno is on tty.usbserial-1410 tty.wchusbserial1410 so in terminal, as per instructions here http://www.abbuc.de/community/forum/viewtopic.php?f=15&t=9451 avrdude -carduino -pm328p -P /dev/tty.usbserial-1410 -U flash: w: eeprom_writer.hex avrdude: invalid I/O mode '' in update specification allowed values are: r = read device w = write device v = verify device avrdude: error parsing update operation 'flash:' I get this invalid I/O mode error. can anyone please advise how to get past this? testing the connection, I think I can upload a sketch ok to the uno, insofar I dnt see any errors when uploading. TIA
  9. Is this actually a pre order thread for the next run? if so i'd like 1 cased cart please!
  10. ..and my order has arrived really quickly, all looks fabulous, will fit soon... thanks Jurgen!
  11. excellent info, thank you! ive found that same putty stuff on amazon.co.uk and I'll use games workshop matt paint (colour tbc) to patch that little area in. re case bottom for $30, where are you looking, ebay or best etc? cheers v much! I'll post when i've got it right.
  12. hi, so I've bought an Atari 800, but some spanner has ruined the holes around the joystick ports: see pic so plan is to fill in the gaps, square off the edges and sand down so its somewhere between a) unoffensive to look at first glance, from a distance b) maybe even the same colour SO! can anyone recommend 1. a plastic repair putty or material so I can build the holes back up again and sand back into shape i.e. not rock hard material, relatively soft is A-OK 2. anyone know the colour? in case i need to spray that front lower panel or the entire base to mask the damage. the rest of the 800 is light to mid yellow so a stock looking colour would be great to find, (aerosol paint). I'm in UK. cheers!
  13. if this is an interest thread... yes please I'd like 1 x board!
×
×
  • Create New...