amiman99

Hi, Interested in: 7800 Pro Controller bottom casing.

Sega CD Sold

I would not buy it either, but if someone wants it...

At $200 I might be tempted to sell my loose cart Rayman.

I never knew something like this exists.

Epson SMD-340, works well with my Amiga, with a small wire, I think from pin 2 to 34 to enable disk change or something like that. It has DS0 jumpers, so it should work on Atari ST.

Anyone has SMD resistor 20ohm 1W (200 written on it), and 103 SMD Capacitor? Let me know please.

I'm going to post this here and some other Amiga forums before it goes on Ebay. It will be cheaper here for obvious reasons. For sale Amiga 4000 with 68040 25MHz CPU, with Video Toaster 4000 board, 2.1GB Hard Drive, 3.0 ROMs and ClassicWB OS installed. Comes with A4000 books (some are yellowed), floppy disks (tested working), and Video Toaster manual (cover is stained). The CPU card has new capacitors installed. The power supply has a "newer" internals, it was swapped from a PC power supply about 15 years ago, maybe more. Below are some flaws I could find: The power button on the power supply (internally) is shorter than it should be. Power supply rod easily pops off when the case is open. The clips on one of the SIMM socket are broken, and the memory module is held by a putty. Works fine. Needs a new SIMM socket. Battery was removed before it could do a significant damage. See pictures. Missing CPU standoffs, it means the CPU card is not screw in securely to the motherboard. There is some discoloration on the front face and the keyboard. The keyboard's space bar is loose a bit, do to broken piece under the space-bar. Works fine. The floppy drive is not A4000 original, it came from an external drive, so the color is different. Works very well. There is a broken screw behind the face plate. The caddy that holds the CDROM and floppy drive is held by one screw, should be 2. (the screw was broken when I try to remove it, it was pretty tight). Joystick port is bent a little. Case has scuff marks all around, not perfect. Amiga mouse has worn off Amiga Logo. The A4000 is stable, was able to do few hour renderings in Lightwave. Play some Doom, run Shapeshifter etc. I'm not sure how much to ask, but some prices on Ebay are crazy good. Some are more than $2k.

Thanks

Thanks Is the schematic on this page correct? https://forums.shoryuken.com/t/pinout-pcb-guide-for-padhacking-an-atari-jaguar-controller/182316/2 I only have 1 quad buffer chip, so I need to be selective in what buttons I'll use. I can skip up/down for sure.

I have a question about the rotary controller. When making a rotary controller from scratch, with out reusing original Jaguar controller, do I need the diodes, and line buffers in my design? I noticed that almost everyone is making rotary controller by modifying or using pcb from the controllers. My goal is to reuse a broken NYKO Sega genesis pad.

I'm interested in SCSI drives, 1GB or bigger.

How does the rotary controller work, is it the same as mouse (using one of the axis?) Can I modify a Atari/Amiga mouse for that purpose?

Is it possible to use mouse to play the Tempest 2000?

Also, at the same time, all 32x games were $9.99. Good times. Too bad that I lost my Kolibri and Primal Rage during my move.

I remember when 32x units were $20 brand new (which I got it) and Super Mario / Duck Hunt were $1. How times changed. Free bump Good luck.

Looks good!

Let us know how it goes. If it works, then I might get one.

any updates on recapping?

GP32, I have the same problem. The flash ROM chip is loosing it's contents for some reason, and it needs a reflash, which is almost impossible. I built a special interface to do that, but I was unsuccessful, because the sw gave me an error.

3d print one? How does it look like? I could design some for you.

I'm thinking that I will probably skip the PS5, at least at launch. I'm not done with PS4 yet, but the constant updates, huge file sizes, HD upgrades (I have 2TB HDs, one internal and one external), it turns me off a bit. Maybe in the near future, there will be a "killer game" that I want, then I will change my mind. I have been Sony follower since the beginning, I got all of them, but for now I will stop.