goodwood9999

No, I did read the manual. But, I don't know how to get the weapon mounted. I have found a weapon by smashing buildings and then I pressed all the numbers and still did not shoot anything. How do I mount the weapon before the level begins?

I have had this game 3 times. Back in 1994 when it came out, then 4 years ago, and now I have just bought it again to give it another try. The 1st 2 times I owned this I could never enjoy it because I could not figure out how to use a weapon other than my fists and walking over stuff. Can someone help me get going on this game because it is 15 years in the making I have been trying to enjoy Iron Soldier.

Well soldering those wires back did not fix the problem it still had the clicking sound. So I found a used transport on ebay for $5 and I installed it today. Bam! My jaguar CD is working now! Thanks for all your help.

OK, now I have my Jaguar CD completed taken apart. I have found that the light blue wire that goes to the motor is no longer soldered on. Also, neither the orange or black wires are soldered into their correct position either. I guess I will be braking out my soldering iron tomorrow and see if problem is solved.

OK, I have moved the spindle up and down in just about all heights. The Jaguar CD spins for between 5-10 seconds then stops, then spins again for the same amount of time and then stops. This goes on 4-5 times until finally the question mark CD comes on the screen. Does anyone recognize this problem?

OK, the spindle was stuck and I did the screwdriver trick and popped the spindle back up into the correct position. BUT, now the CD's all spin, but they all still have the question mark CD. What can I try next? The Jaguar CD unit does not make any strange noises, just the sound of the CD spinning and spinning until it finally stops and shows the question mark.

I have got my Jaguar CD working now by using a model 1 Genesis power supply. I can play cartridges through my Jaguar CD now with no problems. BUT, I cannot get any CD to work. I put in a CD and power it on and then the disk does not spin or anything then after 10 or 15 seconds the TV screen shows a disk with a question mark. When I look inside at the laser, when I press the power button the laser eye jumps one time upwards slightly and that is the only movement or sound coming from the unit. Can I fix this problem?

I have a Jaguar CD with no power supply that I think does not work. I tried a sega master system power supply and the screen shows a picture of my jaguar pointing the the power supply port. I am going to get another power supply and try again, but most likely it is broken. Are there ways to fix a Jaguar CD myself? If so, how can I pinpoint the problem so I know what needs repair?