Jump to content

Oge

Banned
  • Content Count

    199
  • Joined

  • Last visited

Community Reputation

10 Good

About Oge

  • Rank
    Chopper Commander
  1. PICTURES: IN DETAIL: - PAL - With Original Power Supply + 110/220VAC Universal Power Supply - Some cartridge can be added to the bundle - Near Mint (N.O.S. item used for some weeks) PRICE: €98,00 + Shipment (WorldWide)
  2. What about this one? Cheers, Oge
  3. Are you referring to the Nuon Logitech Controller?
  4. Someone who is able to repair TVs, as an example.
  5. You will surely find someone locally which will be able to repair it: in the meanwhile, a small advice. Do not use it or you will end up damaging something. As it is now, it is probably a simple repair.
  6. A revolutionary Video Cable for the Atari Jaguar which I'm very proud to present. It comes in different versions in order to match any TV for both PAL and NTSC dudes. DETAILS: [√] LCDFIX (WORKS WITH BOTH CRT AND LCD TELEVISIONS); [√] RGBPLUS (ADDITIONAL FILTERING OF RED, GREEN, BLUE LINES); [√] GENUINE ATARI JAGUAR VIDEO CONNECTOR; [√] AN EXCLUSIVE, COLOURED, PLASTIC SHELL; [√] FULLY CUSTOMIZABLE (E.G. BNC CONNECTORS FOR SONY PVM; DIFFERENT CABLE LENGHT; ETC.) PRICE: €24,00 (RGB SCART) €22,00 (S-VIDEO + AUDIO 3.5" JACK) €22,00 (S-VIDEO + X2 AUDIO RCA CINCHS) €20,00 (VIDEO RCA CINCH + X2 AUDIO RCA CINCHS) SHIPMENT: €8,80 (EUROPE); €14,60 (UNITED STATES; CANADA & AUSTRALIA) PICTURES: OTHER COLOURS AVAILABLE¬¬
  7. Ideally, a low E.S.R. capacitor has less current leakage. In other words, less ripple. And the less the ripple - ideally - the more the lifespan of the ICs. At each startup of the machine a set of low quality capacitors (or very old ones) may cause a spike/bump which stresses the machine. Internal resistance of the capacitor increases over time and while the machine is functioning due to heat. So, 105° Low E.S.R. is ideally better. Sanyo capacitors (green colour) are very good. The more a capacitor is used/old, the more the resistance. And the budget for recapping a console is very low, why go cheap?
  8. Both S-VHS and SCART Cables are available as I write. Cheers, Oge
  9. You need at least 1000mA. An American Super Nintendo can function with 850mA but a Sega Genesis needs 1000mA. And if we consider plugging a device like a Everdrive, [email protected] is to my opinion recommended. Looks like the component count on the picture posted by thecrypticodor is even less than bare minimum...
  10. Recapping a Sega Genesis is IMO a pretty simple task. @segacdnerd: You can use tantalum if you do not care spending a bit more. You have to be very careful about the fact that tantalum do not like at all functioning with inverted polarity. Most of the capacitors are [email protected] so the budget will be good even with the highest quality capacitors.
×
×
  • Create New...