arcadeshopper

Isn't this on http://ftp.whtech.com under pc utilities? Sent from my LM-V600 using Tapatalk

Exactly. A modem is a modem there are two types of Rs232 connections DTE and DCE The TI rs232 is one and a modem is the same. I could read the manual and remind myself which one it is but you can read the manual too. Therefore you need a null modem to communicate due to the fact that the send and receive signals are on the same pins on both sides and the handshaking pins are as well. If you're curious about what a null modem is exactly you could always Google it On a PC the serial Port is the other model and a modem plugs in with a straight through cable because the pins are not the same.. Greg Sent from my LM-V600 using Tapatalk

I sell them in my store.. arcadeshopper.com However the ti rs232 port is not a standard rs232. You should pull up the rs232 manual and the wifi modem manual and create your own cable. I sell a rs232 breakout box that can be configured to do this and use your existing cable. Greg https://arcadeshopper.com/wp#!/RS232-Jumper-Box-configured-for-MODEM/p/172104040 Sent from my LM-V600 using Tapatalk

Yes you need a null modem and you're going to find that te2 only does seven bits which most Wi-Fi modems don't support the only one that I found that does is the guru modem Sent from my LM-V600 using Tapatalk

Reload just verifies the settings take Write is what you need to do to write the changes to pi.config If it's easier open pi.config in your editor of choice and then make the changes there and save it Sent from my LM-V600 using Tapatalk

I'm even more useless in gpl Sent from my LM-V600 using Tapatalk

fyi Rich here's those instructions for backing up your sdcard: https://howchoo.com/g/nmexndnlmdb/how-to-back-up-a-raspberry-pi-on-windows

Ok I got on his machine and he is able to use DSK1 maps now.. So the program loads fine from DSK1. but in the program it is trying to load pages from a file in that folder and is erroring. We looked at the log file and his routine in RXB to load pages into SAMS isn't even hitting the TIPI .. it's erroring without any log entries in the TIPI side.. Rich is going to post the assembly in another message if anyone can help there, I'm pretty useless in assembly Greg

You need to re-read your messages above then. https://github.com/jedimatt42/tipi/wiki/Troubleshooting describes how to check the log files You need to post photos of your "crashes" if you want help. You need to post logs of the activities that caused these "crashes" in the tipi.log you can cut and paste from the interface or ssh if that's what you are using. Post a photo of the directories in the web interface that you are trying to map to DSK1 You don't need a trailing period in the mapping. You can see in my photo the TIPI.FC folder is mapped with just FC in DSK1 map. If the folder was TIPI.GAMES.EA5 then it would GAMES.EA5 in the map Greg

Here is mine working as expected in dm2k tipicfg and rxb2015 The issue is entirely on your side. Stop attacking tipi and Matt's work for your issue. Idk what's really going on because you continually post non-information and no logs no screen captures no actual facts about how things are configured on your end. Sent from my LM-V600 using Tapatalk

Photos of the crash and log cut and paste please Sent from my LM-V600 using Tapatalk

Does the DSK1. work in dm2k? TIPI. does Sent from my LM-V600 using Tapatalk

Old HDX1.LOAD LIST CHANGE DSK1 TO HDX1 anywhere Sent from my LM-V600 using Tapatalk

Isn't this how every os works? Sent from my LM-V600 using Tapatalk

https://github.com/jedimatt42/tipi/wiki/PI.CONFIG Sent from my LM-V600 using Tapatalk

https://github.com/jedimatt42/tipi/wiki/Devices Devices Drive device names: TIPI. - Primary device name for all file access DSK0. - Alias for "TIPI." DSK1. - Mappable alias for any directory under "TIPI." DSK2. - " " DSK3. - " " DSK4. - " " DSK. - Volume name search device Manage DSK1-4 mappings in PI.CONFIG or with TIPICFG program. Web device names: URI1. - Can be mapped to a URL prefix, as alias for PI.HTTP URI2. - " " URI3. - " " Manage these mappings in PI.CONFIG or with TIPICFG program. Other Devices: PI. - Device prefix for special file access This device supports an extensible set of special file handlers. Currently we have the following: PI.PIO - print to PDF PI.CLOCK - fetches a timestamp whenever a record is read PI.TCP - read/write access to sockets PI.HTTP / PI.http - read access to web hosted files PI.CONFIG - read/write access to TIPI's configuration map PI.STATUS - read access to TIPI status values PI.VARS - read/write distributed variables hosted by myti99.com PI.SHUTDOWN - write a record, shutdown your PI PI.REBOOT - write a record, reboot your PI PI.UPGRADE - write a record, triggers update of TIPI PI software Sent from my LM-V600 using Tapatalk

Try DSK0 And maybe rtfm Sent from my LM-V600 using Tapatalk

Pm sent Sent from my LM-V600 using Tapatalk

Are you running the latest classic 99? Sent from my LM-V600 using Tapatalk

If you want a Sams get a Sams Sent from my LM-V600 using Tapatalk

The question was will it access. The answer is yes of course it will. It's a modern os on a modern computer. Sent from my LM-V600 using Tapatalk

If you want a ram disk get a horizon .. it's designed to be one. Sams is not Sent from my LM-V600 using Tapatalk

So wouldn't resetting the Geneve also call the routine? And if not you're missing something in your power up to support TIPI Sent from my LM-V600 using Tapatalk

Pm sent Sent from my LM-V600 using Tapatalk

Btw https://arcadeshopper.com/wp#!/Escape-from-North-Korea/p/293284289 Sent from my LM-V600 using Tapatalk