humeur

2024-04-18T20:37:50Z

ou also have the solution from your phone

Tu as aussi la solution depuis ton téléphone

jl

April 12

17 hours ago, Ksarul said:

Here's a PEB with a very uncommon ICS 32K memory card in it. I only know of 10-15 of these within the community, so it could be a definite score for someone looking to expand their hardware collection.

You have eyes everywhere, TMS4500 based card I think

Tu a les yeux partout, carte a base de TMS4500 je pense

April 12

1 hour ago, InsaneMultitasker said:

@Shift838 are you setting up the board for regulators, dc-to-dc converter, or both? Asking as i have been wanting to convert my SCSI card to the latter and just haven't gotten around to it.

I did it on my SCSI card just the one for the logic part the other for the SCSI bus does not heat up

Je l'ai fait sur ma carte SCSI juste celui de la partie logique l'autre pour le bus SCSI ne chauffe pas

April 12

On 4/8/2024 at 7:58 AM, Gary from OPA said:

With zuluscsi and my Syquest drive, I am happy with my WHTech card. But I would mind having a second Scsi system.

I tested the Iomega SCSI Jaz, it also works very well, two 1GB and 2GB models.

J'ai tester le Jaz de Iomega SCSI cela fonctionne aussi très bien deux modèles 1go et 2 go

April 12

6 hours ago, RickyDean said:

Atariage on Chrome suddenly quit working. I am getting the following 500 error when trying to open an Atariage.com site. But it seems to be working fine on Firefox? When I try to open in Chrome it first gives the following in the URL "https://forums.atariage.com/admin/install/" then it adds the comment segment on the end. Did a certificate just run out?

Just got on my other laptop and this is not happening, I will try to restart the other and see if it disappears.

I had the same thing on Firefox, I deleted the cookies and it's ok

April 5

This eprom is 24 pin 8K

https://deramp.com/downloads/mfe_archive/050-Component Specifications/Motorola/Memory Components/Motorola MCM68764.pdf

JL

March 26

4 hours ago, OLD CS1 said:

My SO uses a similar tactic to know when she has pulled up far enough into the garage.

Same principle, noise

Même principe, au bruit

March 26

11 hours ago, Ksarul said:

These are actually the first external drives TI used, before the switched to the MPI Model 51s. And, as already noted, they could be connected to the sidecar disk controller box (part of the original peripheral train: 32K, RS-232, Video Controller, P-Code, and Disk Controller). I have a whole set of the peripherals, but I do not have one of this style drive. I had a friend with a pair of them though, ISTR they made a humongous chunking sound when they opened.

I have a copy, when you open the door to insert a floppy disk it hits the top of the drive, from the sound we are sure that it is open.

J'en possède un exemplaire , quand on ouvre la porte pour insérer une disquette celle-ci viens taper sur le haut du lecteur, au bruit nous sommes certain que c'est ouvert.

March 23

5 hours ago, Ksarul said:

That one is from @humeur here on AtariAge. I have bought from him many times--he is a trustworthy seller.

I'm unmasked.

I've been sorting through my equipment for years, and now I'm looking at my SCSI cards. I'm keeping two or even three of them (the G version is broken, the ISP is broken, this card had been heavily cobbled together, 8-volt regulator instead of 5, 10µ capacitor instead of 100 nF, which can be repaired if you have the Jedec file) and I'm actually selling the E version.

I'm always afraid of transport and that it will happen and not work.

Translated with DeepL.com (free version)

Je suis démasqué.

je fais du tris dans mon matériel que j'ai depuis des années, la je regarde mes carte SCSI j'en garde, deux voir trois ( qui elle est hs version G, le ISP est hs cette carte avait été lourdement bricoler régulateur de 8 volts au lieu de 5, condensateur de 10µ au lieu de 100 nF réparable si l'on possède le fichier Jedec ) et effectivement vends la version E.

j'ai toujours peur du transport et que cela arrive et que cela ne fonctionne pas.

March 20

Thank.

JL

March 20

I've never seen or found a LOGO 1 in French, and the LOGO II in French was already very difficult to find. A company called RAC la règle a calcul had the rights and was reproducing this module when TI had stopped.

JL

March 20

Good evening,

I have a question about the WHT scsi card. It has a JP1 connector, what is it used for?
if you have any documentation on this type of card,

thank you in advance.

JL

March 19

March 15

1 hour ago, Elia Spallanzani fdt said:

March 15

databook that I had scanned.

http://www.bitsavers.org/components/ti/_dataBooks/TMS3556_Mar84.pdf

March 5

2 hours ago, mizapf said:

@humeurI'd highly appreciate it; if you like, and if you know how to work with "git", you can review and edit the files "names_fr.prop", "Strings_fr.properties", and "hints_fr.txt" in the directory src/de/mizapf/timt/ui/ and then set up a pull request. But be warned, c'est beaucoup de travail. Vraiment.

The repository is https://github.com/mizapf/tiimagetool.git

I just looked, you've already done a good job, if you don't have to hurry, I can try

Je viens de regardez, tu as déjà bien travailler, si tu n'ai pas presser, je peux essayer

March 5

WORK Fine with Update JAVA version 9

March 5

Ok i have java 8.1 i update this

March 5

C:\Users\cathy\Desktop\ti99 scsi\Ramdisk\contenu ramdisk3\Nouveau dossier>java -jar tiimagetool.jar

Error: A JNI error has occurred, please check your installation and try again Exception in thread "main" java.lang.UnsupportedClassVersionError: de/mizapf/timt/TIImageTool has been compiled by a more recent version of the Java Runtime (class file version 53.0), this version of the Java Runtime only recognizes class file versions up to 52.0 at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at java.net.URLClassLoader.defineClass(Unknown Source) at java.net.URLClassLoader.access$100(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.launcher.LauncherHelper.checkAndLoadMain(Unknown Source)

Sous Win11

March 5

10 hours ago, mizapf said:

The message about the escape character is just a warning and should not block anything. It is not the exception that RickyDean reported in the second message. If you get an exception, please report the contents.

Apart from that, a simple double click should suffice; there is no special installation required. I just tested it on my Windows installation, no problem.

---

By the way, I'm sorry that the French localization is still incomplete. I'll close the gaps with the help of the Google translator, and if you find bad translations so far, don't hesitate to send me corrections.

Si tu a besoin pour le Français je peut apporter mon aide.

If you need French I can help.

March 3

On 3/1/2024 at 11:28 PM, Gary from OPA said:

Printer is working...

I had the same one, they sold some of this Panasonic model

J'avais la même, il en ont vendu de ce modèle Panasonic

February 29

14 minutes ago, Shift838 said:

Which revision of the WHT SCSI do you have?

Revision F dsr 1.6

Not easy SCSI on TI not the hardware but the SCSI Or WDS and the VIB plus the basic commands must no longer be implemented in the dsr. Besides, I don't really understand about WDS

jl

Pas facile le SCSI sur TI pas le matériel mais les SCSI Ou WDS et les VIB en plus les commandes basic ne doivent plus être implanté dans la dsr.

D'ailleurs je comprends pas trop pour les WDS

La revision F dsr 1.6

February 29

On 1/12/2024 at 10:49 PM, Gary from OPA said:

any idea why when i type CALL FORMAT("WDS1.","/V EZ135CART1") as per the manual i get "BAD NAME", was the command changed in 1.6 which i have, is there a new manual besides the one on WHTECH FTP?\

I assure you I have the same thing as you version F DSR 1.6 same for the CALL RESET command

Je te rassure j'ai la même chose que toi version F DSR 1.6 idem pour la commande CALL RESET

February 29

Gary you can make 50 to 25 adapters and use a smaller and easier cable than the big one.

Gary tu peux te faire des adaptateurs de 50 en 25 et utiliser un câble plus petit et plus facile que le gros.

JL

February 29

8 hours ago, InsaneMultitasker said:

I am using essentially the same setup as @Gary from OPA Works great. I have a ZuluSCSI device set on ID 1,2,3,4,5,6 and my internal EZ135 drive set to ID 0. My previous configuration for 20+ years was two internal EZ135 drives.

I have never had an issue with my SCSI card power or regulators. Richard updated my cards and installed new regulators & heat sinks sometime around 2000. Both cards were active 24x7 for many years without a problem. Please take extra care to review and properly set up the termination.

No worries about termination, I've been working with SCSI on PC for years, I know.

Pas de soucis sur la terminaison cela fait des années que je travail avec du SCSI sur PC je connais

Profiles

Forums

Blogs

Gallery

Events

Store

Posts posted by humeur