humeur

the tms2532 of texas instruments is not a same of 2732, a11 is pin 18 of tms but a11 is on pin 21 of 2732. jean louis

yes but this does not change. we must change the component that should decode addresses. the prom is 32*8 as 18s030 27s19 7603...... jean louis

perhaps this ?? http://www.e-clec-tech.com/spo256al2chip.html jean louis

Excuse me i have lost my message. jl

Sokoban is write entirely in assembler Tms 7000. The exelvision basic is similar of cc40 basic. jean louis

a French company Exelvision had built computers ( exeltel and exl100 )with the microprocessor Texas Tms 7020,7040 and the vdp tms3556, He was a former engineer Texas France ( TIF ). Make an emulator was, and a programmer jester has made a game sokoban for these machines.This game is in assembleur. look this image You'll find all the information about the designer of the emulator http://dcexel.free.fr/ and this video demo with the Tms3556 vdp jean louis

use the european power supply is a same of us just the voltage change 110 for us 220 for eur. jean louis

Very very good work. Jean Louis

the ti99 is easy to access, initially have the right elements, complete with a scart interface for France. on ebay you finds. jean louis

your cable is pointless in the ti 99 euro, the vdp is not a same that the us modele. the schematic is the interface that you search. jean louis

I've already answered this question. the ti99 euro can be used with the US cable. Just work with the pal or secam ( with SCART ) interface. the vdp is different. You have a schematic of this interface. jean louis.

I have some hardware for exchange ( no testing all ) card TM 990/10A http://img11.hostingpics.net/pics/890850tm990_10a.jpg http://img11.hostingpics.net/pics/620568tm990_10b.jpg http://img11.hostingpics.net/pics/502609tm990_10c.jpg card TM 990/311 http://img11.hostingpics.net/pics/42293tm990_311.jpg Processor sbp 9989 http://img11.hostingpics.net/pics/800026sbp9989.jpg jean louis alias humeur

We bought our TI-99/4A systems (2) in Belgium and we had the PAL modulator (even though the TI-99/4A came in a box with french packaging). Can you attach a picture how the TI-99/4A with scart connector looks like ? I think the picture quality should be better as with the PAL anntenna thing ? just a picture on ebay http://webcache.googleusercontent.com/search?q=cache:Z2IQWp161JgJ:cgi.ebay.fr/Texas-Instruments-TI-99-4A-Interface-Peritel-PHA-2037-/190393501120+ti+99+peritel+ebay&cd=1&hl=fr&ct=clnk&gl=fr&client=opera this interface is best that pal the signal is rgb

In France this no pal, in germany is pal. in France the standard of tv is secam with the scart ( peritel ) http://www.commentcamarche.net/contents/elec/connecteur-prise-peritel-scart.php3 the text in French http://utopia.knoware.nl/users/eprebel/SoundAndVision/Engineering/SCART.html in english http://en.wikipedia.org/wiki/SCART in english ti sell with the ti99 a interface peritel (scart) in rgb. the ti99 german is a same to France just the video interface is diferent this is a pal modulator to connect on antenna tv. the ti is sell for 256*192. jean louis alias humeur

This piece of info seems to have been "lost in time". I will over the next few days re-build the info, since I still lucky have an Horizon Ramdisk with my RAMBO installed. The later design of the Horzion (4000+ series) had the RAMBO mode built-in, no soldering of thin wires needed. just a photographie for the RAMBO optional excuse me have find the schematic for connect the rambo option thank jean louis

if you search a copy of the eprom The Diagnostic module, I have for you. but juste the file, have you a eprommer for burn the eprom or eeprom. jean louis

I would not write a stupid thing but with my PEB I had the same problems. I solved by cleaning the drive with a diskette cleaning solution from 5.14 with a cleaning spray on the surface of the disc were oxidized sie heads ... the second drive, however, beyond the dirty heads had loosened the elastic engine and were not the optimum speed ... I replaced the rubber bands. Maybe your PEB have different problem but it's mine experience... hoping it could be a solution for you use a corcomp module "PERIPHERAL DIAGNOSTIC MODULE" for testing your pebox, this cardrigde test the rs232 32k and the floppy controller. jean louis

This piece of info seems to have been "lost in time". I will over the next few days re-build the info, since I still lucky have an Horizon Ramdisk with my RAMBO installed. The later design of the Horzion (4000+ series) had the RAMBO mode built-in, no soldering of thin wires needed. just a photographie for the RAMBO optional

hello i search a schematic to connect the rambo opa option to the hrd thank jean louis

I had never seen together with the books and tapes thank jean louis

error excuse me jl

for the parameter classic [usercart0] name=Tutankham rom0=3|0000|8000|D:\Projekte\tutankham\tms9900\TUT.bin D is your hard disk for another hard disk change the letter if you want the game run. jean louis

i have for exchange the atari RXF 52001 module in box with documentation in French. I search a ti99/4 ti99/4a hardware or software for exchange. I do a photographie. jean louis

testing your console ti99 with the module PHM3000 Diagnostics is possible one chips vdp ram is broken. jean louis ( humeur )

that is why demand a tape. this module is multilingual