Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

1,057 Excellent

About atrax27407

  • Rank

Profile Information

  • Gender

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. My system will run forever should the power go out - a whole house natural gas powered generator.
  2. The HRD16 is an 8-bit RAMdisk unless it has the appropriate cable and is connected to a SNUG SGCPU card. So, unless you have that configuration it should be formatted as 8 bits.
  3. I can supply a couple of GENEVE Boot EPROM variants (all created by Tony Knerr). There are two variants of Vn 1.0 which presents a menu and allows booting from a SCSI device. One is for a GENEVE with the GenMod and the other is for non-Genmod GENEVEs. There is also a variant of V .98 which disables the RAM check. I can also do the standard Vn .97 and .98 in either Genmod or non-Genmod configurations. Contact me by PM if you are interested.
  4. F18A has much smaller VRAM - 16K as opposed to 192K with a 9938. At least that is what I was told when I considered buying one from Matt.
  5. Since I have published the source, anyone who wants to do it - go ahead. At the present time, however, there is no 4 MB SAMS card available to test it on.
  6. The F'web Program Editor (i.e., for source code) produces D/V80 files without tabs as well.
  7. If you use (P)rint (F)ile and print to a disk, the "artifacts" which are the tab settings aren't transmitted. You get only the text.
  8. After lots of planning (and the genius of Jim Brain) there is finally a way to substitute a standard 2764 EPROM for the rare TMS2564 that is used in some of the original TI gear. The adapter boards are now available on his web store either as bare boards or as complete units. https://store.go4retro.com/vintage-computer/2564-adapter/
  9. There is an XB program to create "pastel" colors by alternating pixels of different colors. I have it in my library somewhere - I just have to find it. I couldn't find the program in my library. However, I did find the original article and listing. It appears in the January 1997 issue of MICROpendium on page 38. It purports to create 120 shades of color. Enjoyi
  10. Do I understand correctly that FORCE COMMAND is only of use with an FG99?
  11. I've got mine on my Horizon boot menu.
  12. The version on the ERRORFREE site is 3.2.5
  13. Which floppy drive controller?
  14. Here is the complete set of source code and program files from the very beginning (AMSTEST1) from Shawn Baron's initial release through the revisions and updates that myself and Bruce Harrison did over the years. The current version is AMSTEST4. Enjoy! AMSTEST.dsk
  • Create New...