AtariGeezer

Still waiting for you to disassemble RVerter yourself with your own labels without line numbers

ugh. blaming it on something other than their own code.

or on ebay in FLA eBay Auction -- Item Number: 113160240127 for $5.99

New firmware Connected

Tonight I was able to re-flash my backup ESP-01 and install SDK 2.1 onto it Was even able to navigate the menus on Kyles' BBS too. I'll post pics of being connected tomorrow after I change the macros in Bobterm that will allow easy sending of the AT+ Commands...

Yep, looks like you made a typo? AT+CIPSTART="TCP","broadway1.lorexddns.net",23. works AT+CIPSTART="TCP","broadway1.lorexddns.org",23 .won't <- you substituted ".net" for ".org"

Okay, thanks

If that basic file configures the SIO port for different baud rates, could you post it Thanks, Jay

I'm trying to get my backup ESP-01 to work again after trying to flash zimodem to it. It's stuck at a strange baud rate like Mr. Ataris'...

Seeing is believing Yep, I hear it most at 4800 baud.

Bobterm sends the underscore for me. Are you using the original firmware or have you flashed one of the modem emulators like ZiModem or other?

Could you post the source with your changes?

I have been able to connect to my network and make a TCP Connection to Kyles BBS, but that's about it so far

Hmmm, in bobterm you have to type in the AT Command, hit Return, then press CTL-J to be recognized...

Finished my programmer / break-out board last night This is the response from my ESP-01: Ai-Thinker Technology Co. Ltd. ready AT+GMR AT version:1.2.0.0(Jul 1 2016 20:04:45) SDK version:1.5.4.1(39cb9a32) Ai-Thinker Technology Co. Ltd. Dec 2 2016 14:21:16 OK I'll change the baud rate to 9600 and try on bobterm in a bit...

This is perplexing, let's try something different. Connect the ESP Adapter back up to your Arduino and program the baud rate to 19200, then reconnect back up to the A8 and run Bobterm at 19.2 to see if that does anything. Another idea is to check the RX and TX voltages on the ESP Adapter when connected to the Arduino vs the A8. Are you just using the 1088XEL or have you tried another A8 too???

Have you tried a different diode yet? Mine might be a 1N914. That was Dr. V's problem with the SDrive-Max...

Hope you are not referring to Dropcheck as a "Him"

The error in the previous post (pic now deleted) was how I wired up RX and TX the first time which was the mistake. I can visualize how the NAND Gates appear "in the box", it's really rather easy to do... But I will make an easy to read schematic on how to follow the easy diagram

One last time...

Oops, I drew the RX and TX Backwards on the adapter board. Damn, can't wait to get my new eyes

First thing to do is send the "AT+GMR" to see what version yours is and the "AT Firmware". Sending the wrong AT commands after that could brick you new ESP-01 too...

For a windows flasher, there is Flash Download Tools (ESP8266 & ESP32) https://www.espressif.com/en/support/download/other-tools