AtariGeezer

Guess I need to get something like this? eBay Auction -- Item Number: 362015334517

If I push anywhere around the FPGA or on the FPGA, Flash Mem or SDRAM it behaves normally. Yep, tried removing the 40 pin cables too, no change. Been looking for a cold solder joint on the Flash Mem or SDRAM, but nothing jumps out at me.

I PM'd Panos about this yesterday, but I'd thought I'd ask here also for others' input. After I turn the power switch on, the only thing that happens is the 3 LED's light up. If I push down lightly on the main board 2 inches around the FPGA area and turn the power switch on it will boot up. Otherwise no video or sound.. As soon as I release pressure on the board, video goes dark. I've tried on HDMI and VGA... Any ideas / thought on what / where to check???

After my Falcon sat for years without powering up, mine was dead too. But after repeated power up / power down attempts, my HD came back up and was able to back it up...

Okay, but how much would a PAL Antic, PAL GTIA and PAL Crystal (upgrade kit) be for us that already have a working 1088 XEL with NTSC chips?

Same here, ARDIUNO and Display are around $36 on Amazon...

Do you have a PAL Kit with Antic, GTIA and Crystal?

All Fixed TUFFHACK 8.2 (Fixed).ATR Edit: missed a bad byte in the VNT of TuffHack.3 Also added TuffHack 5.0 that I found in my collection.

Renamed TuffHack to TuffHack.3 and TuffHack.org to TuffHack... Works for now. TUFFHACK.ATR

Same one from here?http://atariage.com/forums/topic/266542-unearthed-files-from-alcatraz-bbs/page-2?do=findComment&comment=3784387

It could be a bad FDC, I had the same problem with my ATR-8000 as it read fine, but failed formatting/writing...

Thanks Paul, I'll look into it...

ATR Tools never used an installer. Saving program settings to the Registry or an ".ini" file is done when closing the program.

Count me in for 1 if available...

I have no idea where mine is, still need to organize my books and docs which are in many boxes...

Yup, imaged from from my disks, not from an online resource...

Here's an ATR of that from my collection. MAC-65-01.ATR

Gotcha, a misinterpretation here on my end. No, dropping an ATR isn't implemented yet, Thought you were referring to files in general... Now on the ToDo List

- 06/13/2018 - Changed SendMessage() to SendNotifyMessage() for Font Display. ATRTools-027f.zip

Ahhhh, might have been distracted that day and SendNotifyMessage() may not have beent applied.

Works on remowilliams' Win 10 x64, so it's a crap shoot for now...

Then it should work just fine as long as you have an ATR Loaded...

Which OS are you using? Drag-n-Drop works from Win95 to XP and I think I checked it on Win 7 too...

I've seen other recent Sparta Dos ATR's from other developers that use the same value for the year. A value < 100 = 19xx, 20xx with be 100+... What OS are you using? Dag-n-Drop has been implemented. To Export a file, Right-Click on it and choose Extract. Adding a Time Stamp on Extracted files is doable, but what about DOS's that don't have a Time Stamp like Sparta Dos? Make them using a date from 1985?

I'll take a look, it was working, but there is a few steps involved...