AtariGeezer

How much? I'm in the San Diego area...

romox-ecpc-titles-undiscovered

Got it working now and it was software related, but, only from user error I had set the SDX size to 192k so I could install GOS. Reflashed SDX, then GOS, then updated the Firmware <- this was the problen as I used a 256k SDX image.. Today I changed the SDX size back to 256k, reflashed SDX and the Firmware. Loader isn't having any glitches now Sorry Jon for thinking you had overlooked something, when I made it wonky

Here's something to ponder, the stand-alone SIDE Loader for Incognito runs okay and displays the FAT32 contents just fine and even runs all xex's without a hitch. So it's not a hardware issue that I'm experiencing ...

I received the Refurbed SanDisk cards yesterday and still getting this glitch with the latest firmware: So I tried flashing older versions and the only version that worked with these cards was from June 29, 2017. Both of the Refurbed SanDisk 4GB cards and the Transend 4GB cards will boot to D3: all day long with all of the firmware releases, but only the firmware from June 29, 2017 works with the loader using the 2 different card types...

Ir's all good, for the 3 XF-3 PCB's it was only $16.95 with free shipping...

This is a diagram of what the basic wiring is for the Puff BBS Dongle:

I should have asked you first, cause I ordered 3 CF3 PCB's from OSH Park 4 hours ago and IC's last week from Digi-key. Will have to compare what I have to what's on the new BOM...

It must be some other obscure compatibility issue then after trying a Refresh, since there wasn't any hot-swapping involved...

Anyone making an order for the XEL-CF3 pcb's?

Okay, got it. That's why I figured it'd be safer not to hot swap the Transend cards Will keep that in mind with the new cards when they arrive, thanks Does anything stand out on my results of the Transend card?

Found your tests in this thread , the Refurb 4G SanDisk cards should be here Tuesday. Thanks

Okay, first is the Transend 4GB 133k And the Transend 512MB (wasn't a SanDisk)

I'll run the diag tool and post the results in a couple hours after I get back from my errands...

Just ordered 2 of the SanDisk 4GB 30MB/s cards as noted in this post , so this should resolve my issue... I don' hot swap my cards, it's safer not to

The Transend 4gb 133k cards work great on my Side carts and the Incognito 800. These same cards are also recognized with the CF-][ as they boot up ok to the C: partition. I did find that one of them had a bad boot partition, but was able to fix that in windows. The problem with the Loader was that the FAT32 partition didn't have any files on it and I had to Disable "Hard disk" in the PBI Bios Settings for it to work. It still freezes / glitches if I go try the "Refresh disk" in the Loader Disk Tab though...

Is there a special FDISK needed for the 1088 XEL? The built in Loader either freezes or doesn't recognize any of my CF Cards: SanDisk 512mb or Transend 4gb, but works fine on my Side cart. An already configured Transend 4gb card does boot ok though on the CF-2...

I can account for 4-5 of them

Does this Letter Perfect cart look fake to you? eBay Auction -- Item Number: 132577045165 Label doesn't have any color and printing on eproms says "Letter Perfect 40"...

@Atari8BitCarts, Hey Chris, can you post internal pics of the Multi Cart after you receive it? It looks to run similarly to the Super Pill...

Anyone seen this one before? eBay Auction -- Item Number: 253530069852

Sounds good, just have to order some 44 pin headers and build a cable to test a CF-2 board for now...

Would you happen to have a spare XEL-CF3 PCB to sell?

I have Stereo now Looked through my parts trays and my 2n2222's were all used up so I made an order to DigiKey on Sunday and they arrived today. Replaced Q4 and fired it up and now it works good. I knew it was going to be a FUN build

Not on the ones I received. They may have subbed them? The default way would be go by the length of the leads as the Anode is always longer than the Cathode.