AtariGeezer

Or buy a backup card. https://www.ebay.com/itm/323830886185

I would go back and check for a short between the pins on the GTIA. First remove all LSI chips, then on the GTIA check for a short using a DVM between pins 1-2, 2-3, 3-4, ect... Wouldn't hurt to check 1-40, 2-39, 3-38, ect. too...

After learning 6502, I found it rather easy to code in 68k. The Abacus books helped too

I thought we did... Did you try the last ATR I posted???, Did you make a dongle or plug a joystick into Joy Port 1 and hold down the Trigger button while running to test??? RING comes from a Modem's RS-232 port or a dedicated Ring Detector circuit for Atari Modems...

Received my boards today Thank you Michael for making these and to MacRorie for supplying them 👍👍👍

On a google search for viber.exe, there are some sites that states it has a 78% Dangerous rating. I'd uninstall it...

ATR Tools will do this for you: https://atariage.com/forums/topic/192052-atr-tools/?do=findComment&comment=4331394 Open an ATR and Right-Click on the .M65 file in the Directory Listing and choose View File. Check the View -> Output -> ASCII Menu. Click the Save Button in the File View tab...

Cool, thanks 👍 Any chance to get a copy by email? I'm updating my 1088XEL BOM program for the XLD and thought I'd get a jump on it

Is the BOM ready for downloading???

got'em, thanks...

Bought two to start with

Glad you like it I might add an option for a bigger display, but not manual resizing. Hmmm, okay. Another one to add to the conflicting issues list... Thanks, Jay

PM coming for Pong

It's dead, don't go there...

Build 28 - 06/16/2018 - Changed: Button Logic in ATR Search. - 06/17/2018 - Added: Read CSV Files in ATR Search. - 06/18/2018 - Fixed: ATR Search - Validates FileNames and File Sector Length. - 06/19/2018 - Fixed: Sector Map Display now shows All Sectors. - 06/20/2018 - Fixed: DOS XE and SpartaDOS DateStamp Now Use. 4 Digits. - 06/20/2018 - Added: Extracted Files Now Use.DateStamps from DOS XE and SpartaDOS. - 06/27/2018 - Fixed: Check Disk now Updates the First Available Sector in SpartaDOS. - 06/28/2018 - Fixed: Delete File now Updates the First Available Sector in SpartaDOS. - 01/04/2019 - Fixed: Basic Tokens Now Allow the use of the SPACE character. Build 29 - 07/13/2019 - Added: 2048 and 4096 Sector Selection in Image Formatter. - 08/06/2019 - Fixed: Rename File. - 08/10/2019 - Added: SendMessage() Error Handler. - 08/16/2019 - Added: Support for LiteDOS. ATRTools-029a.zip

I for one can not wait to start on a build up of a XLD, I'll be buying 2-3 board sets Already have a full set of working Atari Chips, not like the XEL build that had some questionable chips...

While you're at it, could you ask if anyone has software for the Macrotronics RM-1000?

On ebay there is one The-Interface for $29, but I have picked up some for lower. The Interface ][ can be bought for $25...

Check out that thread for HamSoft and Amtor too from kantronics. What TNC or Radio Modem do you use?

Hamtext 1.1 and 1.2 Dumps

I left my Incognito boards installed when updating and didn't have any problems... Same with SiIDE and U1MB.

If your PC has a parallel port, look above on post #81

I used a parallel programmer from 100RandomTasks.com that I got off ebay and made my own cable (from 2 different cables: 2x5 2.54mm pitch and a 2x5 2.0mm pitch). Xilinx Parallel Programmer based on the popular Cable III http://www.100randomtasks.com/xilinx-parallel-programmer http://www.xilinx.com/support/download/index.htm Xilinx Standard Edition is almost 6gb I only installed the Lab Tools for now iMPACT software The 100 Random Tasks is set up as: 1 - VCC ---- 2 GND 3 - TCK ---- 4 GND 5 - TDO ---- 6 GND 7 - TDI ---- 8 GND 9 - TMS ---- 10 GND JTAG 1 - VCC ---- 2 GND 3 - TCK ---- 4 TDO 5 - TDI ---- 6 TMS 7 - XXX ---- 8 XXX 9 - XXX ---- 10 XXX [XXX] = not used Pin#1 is at the top right if you look at it like (parts side): 9 7 5 3 1 ------===------ | o o o o o | | o o o o o | --------------- 10 8 6 4 2 The ribbon cable on the JTag header is much smaller than the programmers' header... Pin 1 is Top side on the right - VCC... look closely and you'll see a "1" between VCC and the top right pin...

ebay

Thanks guy, write in on your forehead in magic marker please, so you don't forget me when you have a working one available