krupkaj

8-1198

Another try. Have you seen the instant replay? It runs everytime you earn more than 4000 points in the level. 34400

what kind of IDE buffer do you install?

The really nice solution is the PARCP. There is a new version which utilizes USB port on the PC side. Check it here http://joy.sophics.cz/parcp/parcp-usb.html

Little better 23500

It's not a game of my taste. 10400

Finally have been to Earth

Whatabout *Ardy the Aardvark *Laser Gates *Ninja

There is a manual in HYP format in the archive. You can read it online here: http://phoenix.inf.upol.cz/~opichals/libhyp/hypview.cgi?url=http%3A%2F%2Fftp.lip6.fr%2Fpub%2Fatari%2FGraphics%2Fkand203e.zip&hideimages=0&hidemenu=0&dstenc=

1st ship 187750 and just before the Earth 281250

I see this will be tough competition. I have got endless stone serie at the Jupiter stage with my last live 154900

49220

First was cassete Atari XL12, which is not listed in the poll. Then I bought XF551 in Atari shop in Wienna. Now I use SDrive.

43850, little better, but the game is not really easy

I have several power supplies for Atari ST with bad or very stiff power switch. Do anybody know source of them?

34320 not so good

YPbPr is different input. You need a converter from RGB to use it.

exactly the pin 21 is the metal surround (chassis) and it should be connected to the ground.

IIRC Resource Master from Ardisoft supports language layers.

it is great it works for you too. I think the "buzz" is caused by the processing of analog signal in the TV. Maybe you culd try to switch off some enhancement. I think there is lot of them

just make or buy SCART cable. Unfortunately not all LCD TVs like the the signal from ST, but usually it works and the picture is really nice.

the diode prevents the voltage to go back to atari. and yes the capacitor is 10 microfarad

I had a big trouble with LG monitor/TV 27MA73D. I think it behaved very similar to your TV. There was a problem with the switching signal connected to pin 16 on the SCART. Usually the pin 16 is connected to Vertical Sync from the ST. I made this little modification in the cable, all components fit inside the SCART connector And now it works really well. I had do the the same cable fo Jaguar. The cable works on my LG and Grundig TV

Jaguar needs power supply with 9V 1.3A output with negative pole on the center of the connector. The CD drive uses the same power supply.

The zine is available from http://flop.atariportal.cz site as usual.