-
Posts
358 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Posts posted by metarog
-
-
I had a life change but I should be able to get to my O2 stuff in a few months. I’ll make those scans then.
- 1
-
They did have it when I posted the link but now I this gone. 😞
-
I’ll try to that next week when I get back. Happy New Year!
- 1
-
I’m told rescuing 9 guys is possible. It is a 9 on the high score site. I’ve never gotten over an 8 either though.
-
-
The only one I know of but cannot vouch for is this one in Canada.
https://www.batterybuyer.com/tapwave/7650-battery-for-tapwave-zodiac-z1-zodiac-z2.html
-
Great find. 👍
-
-
That looks pretty good but I’ve never bought one so hopefully somebody else can chime in.
I don’t know if anywhere that sells them either.
-
That could be several things but in my experience the most likely culprit is the 8048 chip. I’ve had about 20 O2s in my life and about a quarter had that chip burned out.
It is a proprietary IC so not easy to find loose.
You might try to check the voltages coming out of the voltage regulator just in case as that does go bad although not nearly as often as the 8048.
The bubbling of on the bottom of the board is fairly normal for O2s.
- 1
-
Add my name to the drawing please.😁
-
It could be the connector and/or the microcontroller or graphics chip going bad. These do go bad from time to time. You could try reseating those chips too… they are socketed on the motherboard.
-
I was happy to help out. 👍
-
-
-
Great. I’ll upload another tomorrow if possible.
- 1
-
-
I think I can do Take the Money tomorrow.
-
Nice job. Good to know just in case too.👍
-
I think that is the item but I’ve never used it myself. That ribbon should pull right out of the board btw. I just did a recap and it went back in no problem.
If there is enough slack you could try trimming it back before the break too if the foil doesn’t work.
-
Q-Bert, Frogger and Super Cobra were not released in the USA for the Odyssey 2.
-
I’ll check it out and sub you. Your not alone.?
- 1
-
I played some Attack of the Timelord with the Voice module in Baer’s honor. Thanks for the reminder.?
- 1
-
They look great after your clean up. ?
Odyssey 2 manual scans
in Odyssey 2 / Videopac
Posted
As promised… pics of the Conquest board.