Jump to content

Dizzy

Members
  • Content Count

    57
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Dizzy

  • Rank
    Star Raider

Profile Information

  • Gender
    Male
  • Location
    Bordeaux, France.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. After 24h of "burn test", my 1040STE is now working again. What I did for that is I removed all the DIMMs, cleaned them, cleaned their slots, plugged them back in. The STE is now working fine since yesterday night. But again, time will tell if the problem was really the RAM, I cross my fingers ...
  2. Now my 1040 STE is failing again finding the floppy drive ... What is strange is that the floppy led lits, like if the STE had found the floppy and was trying to access it. But the Gotek display does not show the number of the selected slot, I have dashes instead ... I tried multiple USB sticks, same issue. I am now having a doubt on the Gotek, as it was working on my STF but some games failing to load. When my STE was working again, the same games were working fine. I am lost now ! EDIT : I finally could test another Gotek on my 1040STE, and I have the same issue. So the problem comes for sure from my Atari ... bad news ...
  3. Now my 1040 STE is failing again finding the floppy drive ... What is strange is that the floppy led lits, like if the STE had found the floppy and was trying to access it. But the Gotek display does not show the number of the selected slot, I have dashes instead ... I tried multiple USB sticks, same issue. I am now having a doubt on the Gotek, as it was working on my STF but some games failing to load. When my STE was working again, the same games were working fine. I am lost now !
  4. "Unfortunatly", now my Atari works fine again ... it is now working for more than one hour and still works fine ... I do not know why, maybe my Ajax reseat (and socket cleaning) solved the problem only later ? As I don't believe in miracles, I think it will come back to a bad situation soon, time will tell ...
  5. OK. Thanks to all of you for your quick answers, I guess all I can do now is to try to replace AJAX ...
  6. Yes the ribbon has to be twisted for the Gotek to work. But my Gotek was working before failing, so I know there is no issue on this side.
  7. No I cannot swap the STF DMA with my STE DMA : on my STE the DMA is a C398789-001 which is of a square shape and soldered on the motherboard (not socketed). On my STF the DMA does not have the same shape (rectangle).
  8. No I definitly confirm that the floppy data cable is soldered on the motherboard, which is normal (see this link https://www.ebay.com/itm/Retro-Atari-ST-Floppy-Power-Data-Cable-Extender-29cm-for-Gotek-Drive-Mounting-/123623525932 where it is confirmed that on Atari ST the floppy data cable is soldered, and I confirm that mine is soldered). No, I did not invert the cable on the Gotek. But thanks for your answers.
  9. I do not know if it was modded. Isn't the Ajax standard on a 1040 STE ? I cannot swap the DMA with my STF : the DMA is soldered on the motherboard and isn't the same kind as the one in the STF.
  10. I could not see this item on ebay as I live in France, and when I ask to ebay to show me items worldwide, it only shows me the items which the sellers want to sell worldwide (local sells are not shown to me). Thanks for your link I will check if he agrees to sell worldwide. I guess the power is good as my Gotek and original floppy drive do start (leds are lit). For the floppy data cable, unless I am wrong, it is soldered on the motherboard of my 1040 STE. Isn't it ?
  11. Hello, since this morning, my 1040 STE does not read any games anymore. I loaded International Karate using my Gotek, just before the game started some bombs were displayed and the STE crashed. Since then, when I start my STE, the STE tries to boot the floppy (Gotek) then display the desktop but with no floppy icons (the desktop is empty), just like if no floppy drive was connected. I tested the Gotek on a 520 ST and it is working fine. So the problem comes from somewhere on the STE motherboard. I think the problem may come from the C302434 (AJAX) which is the floppy controler, I tried to reseat it but no luck. As the STE behave like if there was no floppy drive connected, do you think the issue may come from the C302434 ? If yes, do you know where I can buy one ? Thanks a lot !
  12. OK, so I will give the "expert" answer to myself : a brown screen at startup means that the Atari 800 does not find the OS ROM ... How do I know it now ? hummm .... well .... I feel very very very stupid ... When I was doing my last tests about CPU swaps, I did not put back the OS ROM into the Atari ... AAAArrrgghh !!!! Sooooo Stupid I am !!!!!!! So I re-did all my tests, the conclusion is : what was causing the Atari to crash after a few seconds of use (except when playing with games cartridges) was the 6502C on the CPU board. As I already ordered a new 6502C alone, I could swap it with my bad 6502C to let my CPU board work fine. So I ordered a new spare PAL CPU board for nothing ... I will have now to sell my working spare PAL CPU board ... Thanks to all of you for the help you provided to me !
  13. The problem is getting even more weird ... Here is what was the situation before today : - When I turned on my PAL Atari 800, the Atari was crashing after a few seconds of use, but only when using BASIC / NOTEPAD / or floppy disks. When I was running games cartridges, everything was fine. - When I swapped the CPU card from an NTSC Atari 800, then no crash anymore (except of course the displayed colors which were wrong due to NTSC/PAL incompatibility). - I tested ANTIC / GTIA, they seemed to work fine. So I ordered a new 6502C, but when I swap it I get a brown screen at startup. So I thought the problem may come from another component on the CPU board. So I finally ordered a new PAL CPU board. I tried it today, but when I startup the 800, I am still getting the brown screen ! So I decided to put back the old PAL CPU board, and now I am still getting the brown screen at startup even with this board !!!!!!! I don't understand why the situation is getting worse ... Finally my problem does not seem to come from my CPU board, I now need help from an Atari 800 expert to tell me what means a brown screen at startup .... Anyone knows ?
  14. Yes, but I don't understand why I get the same result when swapping my 6502C with another 6502C, and when swapping my 6502C with a 6502B ... To me the result should be different, and I even more don't understand why the original Atari 800 6502C is working better than the 6502C of my Atari 800 XL ...
  15. Bad news ... the 6502C replacement did not solve my problem ... And I still cannot understand this strange situation : - If I replace the current 6502C by a 6502B (new one), then when I power up the Atari 800 I get a brown screen. - If I replace the current 6502C by a 6502C (new one), then when I power up the Atari 800 I get a brown screen (same result !). - If I put back the original 6502C, then the cartridges work fine, the only problem is when using basic or notepad : freezes after a few seconds of use ... So if the problem does not come from the CPU (or GTIA / Antic), why only the original CPU work almost fine (but not well) ? Anyway, now that I have a 800XL, can I swap the Antic / GTIA from it to insert them into the 800 ? (I don't think so as Rybags told me they are unic to each system...) I guess that now I will have no other choice than buying a new PAL CPU board ... Aaargh !
×
×
  • Create New...