gferluga

Yes... ./mame ti99_4a -window -nomouse -skip_gameinfo -autoframeskip -natural -ioport peb -ioport:peb:slot2 samsmem -ioport:peb:slot8 bwg -ioport:peb:slot8:bwg:2 525dd -ioport:peb:slot3 pcode -flop1 "software/ti99_pcode/SAMSUTIL.dsk"

Looks like SAMS card is not available in Mame 🤔

I'm using MAME but probably I'm doing something wrong. If I kick <E> or <R> is complaining about missing compiler or editor. This is my command lone for execution: ./mame ti99_4a -window -nomouse -skip_gameinfo -autoframeskip -natural -ioport peb -ioport:peb:slot2 32kmem -ioport:peb:slot3 tirs232 -ioport:peb:slot4 pcode -ioport:peb:slot8 tifdc -flop1 "software/ti99_4a/disks/SAMSUTIL.dsk" Thanks!

How do I map a DSK floppy disk drive image? Thanks!

Runs wonderful on MacBook M2 Arm processor ;)-

Any rpk version for Mame? Thanks...

Where are the MAME DIP switch settings to activate the P-Card? Preferably from command line ;)- Thank you!

Can we get the graphxb.dsk (example programs) or any other sample disk images? Thanks

😅🤣😂 at least there is a begin... 😉

Merci, Ciro 😉

Ti-99 forever… I learned and I build my profession on that machine. The challenge of the TI-99 was that there was no much software available and to get results you should code, code and code. Coping from listings, inventing pattern graphics, dealing with records on tape. Fantastic experience. The next onw I believe the Sinclair QL, with the super Super Basic…

Where was assembled the computer? It’s written on rear…

Wget works for me: localhost:~# wget "https://ftp.whtech.com/Cassettes/rawWAVfiles/3D-LABY%20(2).w av" --2023-12-03 18:35:17-- https://ftp.whtech.com/Cassettes/rawWAVfiles/3D-LABY (2).wav Resolving ftp.whtech.com (ftp.whtech.com)... 148.135.75.22 Connecting to ftp.whtech.com (ftp.whtech.com)|148.135.75.22|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 3986220 (3.8M) [audio/x-wav] Saving to: '3D-LABY (2).wav' 3D-LABY (2).wav 100%[==================>] 3.80M 768KB/s in 5.7s 2023-12-03 18:35:23 (680 KB/s) - '3D-LABY (2).wav' saved [3986220/3986220] localhost:~#

Dear community… Does someone have the Olivetti M20 CP/M-86 disk images? The one running with the x86 board, not Z8000. Thank you!

Nice job…

Contact the seller and doesn’t want to ship to Europe 😌

CC9900 EPROMS with the updated Millers Graphics EPROMS still available? Easy to repace? No soldering skills? ;)- Thanks!

Mon ordinateur sais tout faire TI99.mp4

Yes! That’s what I was looking for…. So many years!!! This spot was broadcast in Italy too!!! I saw only once… I was 15 at that age. If I remember good was on a Fininvest channel Canale 5

Sorry. 140k I’ll try your suggestions. Thanks in advance.

Both. Real cart and fg99. Honestly I have to admit it’s cool… loading Multiplan with no disk 🕺🏼

I have a dsk image of Micro Chess that runs on AppleWin or Apple][ and runs on my IIe and IIc on real floppy disk but will not run on GSplus nor mapped on my GS with Fujinet card on SmartPort. The same for Multiplan or any other 160k dsk image. Most of the times the message is: Unable to load Prodos

Dear community. Something strange is happening to my system. With my TIPI on my PEB up-and-running from the TI console I run Multiplan. I get to the Multiplan startup screen, asking to insert the boot floppy, but I do not have any floppy in the PEB nor napped in TIPI. I press <Enter> and Multiplan is running. Please see my configuration below. Any other module (like TI-Writer or E/A) that requires a floppy is not running, returning Error 06. Any idea? Thanks in advance…

I'm trying to convert some Apple II disk images to IIGS format. For instance micro_chess.dsk in 2MG format but with no success. Any idea? Thanks!

Well. Out of the box the original TE software doesn’t gain any advantage of the F18a. I test it… However there are some options: - hack the original TE software - use a mechanism like the Adam CP/M to use an external terminal - try another terminal emulation software, maybe the one from TIPI I’m not taking the challenge here this time 😉