ryanr256

Will these work?

Well, I've decided on the Newell. Mainly because I have an 800XL with a Newell 256k in it. But wait, I do have 2 1200XLs. My initial thought was to mod one and keep the other stock. I may upgrade both now. -Bob

In the thread I mentioned above there was this post: http://atariage.com/forums/topic/113519-newell-omnimonramrod-os/?p=1375170 That post has a link to download the Omnimon 800 manual. I've extracted the install information, including the instructions for the optional switch from that manual and attached them here. -Bob omnimon_install.pdf

There's a link to Omnimon 800 docs in this thread: http://atariage.com/forums/topic/113519-newell-omnimonramrod-os/ Maybe it has what you need? I have an uninstalled Omnimon 800 board that I can look at/take detailed pics of if that would help. I'll have to find it in the many boxes in the garage. We recently moved. -Bob

I have a 1200xl that I want to put a 256kb memory upgrade in. I have a Wizztronics and a Newell available. Which would you use and why? -Bob

I'm in the Cincinnati area, near Montgomery. My Atari stuff is still in boxes, but I think I can dig out a disk or two. I don't have a system set up to do the copying though. -Bob

Http is port 80. Just telnet to port 80 and send the proper http request. You'll get the raw html of the page. Smtp is port 25, maybe? (going by memory, it's been a while since I've played with TCP ports). Telnet to port 25 and send SMTP, or ESMTP, commands. -Bob

Sent you a message. -Bob

Bob Wooley had a mod to add TTL output to the XEP-80. I have an XEP with the mod, but have never connected it. -Bob

Can you put an Omniview chip in place of the Atari OS chip? -Bob

1. ATR-8000 2. Black Box w/floppy controller 3. Antic and A.N.A.L.O.G. magazine collection -Bov

I would close the mech on a spare disk or something similar. Didn't they come new with a piece of cardboard or something in the drive slot and the door closed? -Bob

I think I have a pin. I'll see if I can find it and get a pic. We've recently moved and everything is in boxes. -Bob

Ordered mine today. Glad I didn't wait too long. -Bob

I am interested in this. -Bob

There's one on ebay now. It's a little more than $20 though: http://www.ebay.com/itm/DISKEY-AI-Adventure-International-Scott-Adams-Ultra-Utility-Atari-1983-/391137508622?pt=LH_DefaultDomain_0&hash=item5b119cbd0e -Bob

I picked this up with the intention of putting it into one of my 1200XLs: No instructions, or MyDOS disk, and I now have to pick up some 256x1 150ns chips. But, that's OK. I also have an 800XL that has the Newell 256K upgrade. -Bob

I do not have the capability to dump carts. Sorry. -Bob

Not a game, but I have this: http://atariage.com/forums/topic/207010-compu-cable-systems-spectraview-ii/ -Bob

Here's a PDF of the OmnimonXL and OmniView manuals:: Omnimon_Manual.pdf OmniView.pdf

Funny. I just messaged him about a Rev. D motherboard I have laying around. It's not socketed though. -Bob

Same here. I'm at 65.4%. Anybody able to help? -Bob

There's a picture of an 800 8K Omnimon board (with a couple of ROMs) in this thread: http://atariage.com/forums/topic/205851-should-i-be-disappointed -Bob

I now have two 1200XL machines: 83S DA 53974 163 - USA (annotated in post #251 above) 72R DA 13551 213 - Taiwan -Bob

You have my interest! :-) -Bob