ryanr256

There's a picture of an 800 8K Omnimon board (with a couple of ROMs) in this thread: http://atariage.com/forums/topic/205851-should-i-be-disappointed -Bob

I now have two 1200XL machines: 83S DA 53974 163 - USA (annotated in post #251 above) 72R DA 13551 213 - Taiwan -Bob

You have my interest! :-) -Bob

Software that was released after Omnimon came out. Once the software houses became aware of the capabilities, they started taking steps to minimize the impact. I don't have any specifics off the top of my head, maybe someone else will chime in. [edit] I think most of the Electronic Arts titles don't work with Omnimon. [/edit] -Bob

My 800XL has the RamrodXL and Newell 256k mods in it. I've also done the SuperVideo 2.1 mod on it. It's the pride of my collection. I'd like to find a Rambo board (or two). But we digress. :-) To reiterate what has already been said, running the OSNXL (w/Omnimon) alone probably isn't a good idea. Most of the later software recognizes Omnimon and won't run with it active. So you need some way to switch to a "normal" Atari OS to run that software. -Bob

I've always thought that the Newell memory upgrade was different than the Rambo. -Bob

OSNXL will let you use the Omnimon monitor and gives you an 800 compatible OS with a few added features. OmniviewXL gives you an 80 column display that may or may not work with a specific program. Ramrod XL gives you a board that three OS chips can be plugged into (Original XL OS, OSNXL, OmniviewXL). The board has a switch which will allow to select which OS you want to run before you boot the machine. This board plugs into the OS chip socket on the motherboard. If you are just buying the chips, you will have to come up with your own switching system to switch between the various OSes unless you want to disassemble your XL before each boot. I have the RamrodXL in my 800XL. I don't use it much anymore though. I have it because I used OmnimonXL quite a bit back in the day. Actually, that's why I have the 800XL. Nostalgia. If you want the full benefit of OSNXL and OmniviewXL, then look for the RamrodXL. It will give you the most flexibility with little hassle. I don't think just having the chips will be of much benefit to you unless you want to install one in place of the XL OS and leave it there. But, that's my opinion. [edit] If your 800XL has soldered chips, you'll need to unsolder them and either solder a socket for the new OS chips or solder the new OS chips on the motherboard. Or, you can leave the original OS chip in place, but then you'll have to cut legs on the chip, add solder a switch to the cut legs and solder the new chip to the old. [/edit] -Bob

1027 printer, 1010 recorder and supra 300 baud modem and some power supplies. There was a box for a 1025 printer and SX212 modem, but no 1025 or SX212. The stuff is in my garage airing out. Has a funky smell. Like Orpheuswaking stated, nothing rare. -Bob

Thanks! I'll be picking the stuff up after work today. -Bob

My favorite 8-bit is the 800XL I have with the following mods: 1. Newell 256K RAM upgrade 2. SuperVideo 2.0 & 2.1 (2.1a?) 3. RamrodXL w/ OSNXL, Omnimon and Omniview -Bob

Here's the conversation about the cart I found in my collection: http://atariage.com/forums/topic/207010-compu-cable-systems-spectraview-ii/ -Bob

Sorry. Mis-informed. :-) -Bob

Not a rare cart, or an esoteric piece of hardware, but a like new first edition: -Bob

I would like one of these. Please add me to the list. Thanks. -Bob

Bought an Atari 8-bit Bounty Bob Strikes Back Strikes Back cartridge. It was as advertised and well packed. Would definately buy from him again.

As I posted in the For Sale thread, I'll take the Bounty Bob. Thanks, -Bob

I'll take it! -Bob

This is what I did: http://www.atariage....y/#entry2662913 I was very careful removing the mylar/silicone. I went real slow and didn't rush. It took a while but I was able to separate the membrane from the circuit board. Once it was apart, I cleaned the contacts and redrew the traces with the CircuitWriter pen. Works like new. -Bob

No c64 stuff with me, but I remember a jerk off game for the Atari. And, I remember there was a text adventure game, like Zork, that had an adult theme. I think it was called "Hotel Erotica" or something similar. I've not seen either in my collection of disks. -Bob

Oh, I spotted it. I just didn't respond. Trust me, it took a while to type a reply that I thought couldn't be turned around. I knew I couldn't say things like: "I came across this disk......." "I got this when I was poking around......" "I was able to get it up........." etc......... Oh and for the images, when I get things organized I can make images of whatever disk I have. -Bob

That's probably true. I formatted a blank disk and put Atari DOS 2.5 on it. The cart had no issues saving and retrieving the page information from the disk. I created a couple of test pages and saved them. I do have to admit that my first attempt at saving/retrieving resulted in multiple "disk error" messages until I figured out I didn't have enough space on my scratch disk. Once I used a fresh disk everything functioned perfectly. -Bob

Well, most of my collection has been acquired by buying a lot of stuff even if I on;y wanted one or two things out of the lot. The other things were put in a box or on a shelf and forgotten. Now, I'm going through things and finding gems like this. I am not the original owner. Whoever had this also had a bunch of strip poker data disks. I found them when I was looking for a DOS disk specific to the SpectraView II cartridge I also discovered in one of the boxes. -Bob

I could, I guess. But I don't have any ROM dumping hardware. I do have a Super Pill. Maybe I can use that? I wonder if the cart works on an 800. Hmmmm............................ -Bob

It works! Here's what happened: I was using my trusty 800XL and was getting nowhere. I decided to try the newly acquired 1200XL just to see what would happen. Plug the cart in and boot. Same results as the 800XL. I noticed with the 800XL that if I hit reset after booting I would get a very, very brief screen that said "Disk operation in progress. Please wait......." That told me something was working. With that in mind, I pressed RESET on the 1200XL. Same brief message and back to black screen. I then just started pressing the keys across the top of the 1200XL. Nothing until I pressed the "BREAK" key. A menu! Hey! But, the L2 LED was lit indicating the keyboard is disabled and nothing worked. But, I had a menu! I shut down the 1200XL and booted the 800XL. Sure enough I can get the menu. And the keyboard works! I took pics of the screens. No pic for option 4 or 5 because I didn't have a disk drive attached. The cart boots into what is called "Run Mode" and looks for the configured files on the disk. If nothing is configured, it just sits there, doing, well, nothing. Pressing BREAK interrupts Run Mode and puts you into Command Mode. On the 800XL the BREAK key is part of the keyboard whereas on the 1200XL it's up with the START, OPTION, etc. keys. That's why I was able to accidently hit it on the 1200XL but nowhere near it on the 800XL. Here is the main Command Mode screen: This is the screen for Option 1 - Revise Date and Time: Option 2 - Edit a Page Option 3 - Edit the Scheduler I was unable to get pics of Option 4 and Option 5 because I did not have a drive attached. -Bob

I actually have a copy of this game on disk. I was looking for a something else and saw a disk with a label that said "Soft Porn" so of course I had to boot it up. And that splash screen resulted. -Bob