-
Posts
514 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Posts posted by slinkeey
-
-
I've published the very first patch for the FinalGROM 99 that fixes some minor annoyances:
- When you turn on your console, the FinalGROM 99 blinks with pattern #1 (see troubleshooting section), but works normally when you press the FinalGROM 99 reset button once.
- The FinalGROM 99 menu shows system or hidden files or folders
To apply the update, please go to the homepage and read section "How to Upgrade the FinalGROM 99" carefully, then download and apply the patch file. For those with issue #1, you'll have to press FG reset once to get going when you see the blinking LED.
In case of questions, please ask before you try!
I have this problem, but I doubt I need the update, as I just received mine from AracadeShopper. Any tips?
-
Got married last week.
Hey, congrats man.
- 1
-
Welcome to WI.
Winters will come in handy for TI stuff.
- 1
-
A 2x5 IDC connector doesn't fit on a PI's GPIO without a stacking header, which, again makes it too tall for cases that enclose the top of the PI.
I can only recommend at this stage, that if the target is TIPI, the PI case should have open sky over the GPIO. That is generally true of the good and cheap cases.
-M@
Yea, I forgot about the sides of the 2x5.
What about something like this, but of course a 2x20 instead of 2x25.
People could even make their own shorten the remainder.
-
Use IDC connector instead of Dupont?
-
Use IDC connector?
-
I saw that you were working on a PEB version, but in the meantime, does the sidecar version have a passthrough?
Thanks.
Looking at this photo makes me think, "Yes".
- 2
-
The one ohm posted appears to have a slot for a ribbon cable.
https://www.kksb-cases.com/kksb-raspberry-pi-metal-case-model-3.html
- 2
-
Google image raspberry pi 3 stainless steel case
- 1
-
Yo.. Sorry.. I dropped off.... On purpose. Had to go do something..
-
- 3
-
It appears that Otis may have used the TMS9900 for elevator controls.
https://www.google.com/patents/WO1981001829A1?cl=en
- 1
-
Fishing/Boating/Camping
Electronics
-
Known 2400 Baud limitation? If so, that's cool. I'll know to stop goofing with higher rates.
-
Every time I see dphirschler, I think Chrysler.
-
Software version 05.2 (031113) LTX
The program yielded 48
Maybe something related to my NanoPEB?
-
I kept dropping the speed, and it would get a little better with each drop.
2400 baud works great.
UDS-10-IAP Rev B20
I will need to lookup the firmware..
-
I lowered them both to 9600.
I wouldn't think that the web browser would be more forgiving to problems.. I will mess with it later... Thanks
-
Yep, no problem.
Heat Wave BBS
-
Yep, the chars are echoed properly.
Typing [ATDT74.193.9.234,9640] shows up as [ATDT74.193.9.234,9640] on my screen.
My Console has a Speech Synth, F18, and NanoPEB.... That's it.
That's a good point. If it is echoing back, then we know the terminal is interpreting what the UDS-10 is sending.
-
Yeah weird that stuart's browser works perfectly..I did switch from D4 to D6 in order to use legacy hayes commands, as it is easy to toggle back to D4, for the browser.
I just get jumbled junk. Does the nano need a lower baud rate? I lowered UDS-10 to 9600. I am wondering if my cable is wrong..
Mine is like the NanoPEB layout.
http://www.stuartconner.me.uk/ti/ti.htm#internet_web_browser
-
Yeah, those are my old settings.
I put it back to those, and then connected via.
C74.193.9.234/9640 fills the screen with garbage.
Camera Capture Compressed as it was huge.
- 1
-
ATDT74.193.9.234,9640 fills the screen with garbage.
-
This is what I have..
*** Channel 1
Baudrate 19200, I/F Mode 4C, Flow 00
Port 00023
Remote IP Adr: --- none ---, Port 00000
Connect Mode : D6
Disconn Mode : 00
Flush Mode : 00
I knocked the baud rate down to see if that helps..
The FinalGROM 99
in TI-99/4A Development
Posted
Hey, thanks for the help. I just assumed (bad habit) they were recent builds knowing it was on backorder, and it recently shipped.
Yeah it still does pattern one, until I press the reset FG button, with V1.3 installed.. Fresh formatted SanDisk. Not a big deal to press reset..
Thanks!