Jump to content

SoulBuster

+AtariAge Subscriber
  • Content Count

    2,785
  • Joined

  • Last visited

Posts posted by SoulBuster


  1. I am not married so I am not limited to what my setup can be.  I moved to North Dakota in January and finally got my stuff delivered March 5th and now have it setup. I have a very long living room and half of it is used up by computers. I' will go from right to left from the front door of the house. You can see the coat closet on the right side of the following pic and the front door is to the right of that.

     

    I'll Start with the PC.  4 years ago it was the top of the line PC.  The only other thing to mention is the NAS. That little box that is down and to the right of the calendar hanging on the wall and has the SuperCard Pro  and paperwork on top (still need to get that setup).  It has 48 terabytes and stores all the Atari files and programs, among other things.

    20210406_041724.thumb.jpg.31a7f60f9d4bfd674ed5b7cdd6d25839.jpg

     

    To the left of the above station is another computer desk that hosts my Falcon and TT. The Falcon is a 14 Meg ram, 32 Gig PATA SSD with Blowup Video clone and a SyQuest EZ135 and a SyQuest 200 drive attached.  Net USB not pictured with it.  The TT is 10 meg ST ram and 32 meg TT Ram with a Cyrus video card and a 300 meg SCSI boot drive and a NETUSB.  Below the desk, you see a white tower (for details see this thread).  This is also attached to the TT. It has a SyQuest 44, SyQuest 88, SyQuest 200, SyQuest EZ135, SCSI CD and a SCSI2SD adapter.  The SCSI2SD is configured for 4 1 gig drives and 8 500 meg partitions.  I partition everything for TOS 1.04 for compatibility reasons.  And lastly, an I7 PC for use in transferring files between all my Atari's, 8-bit and ST.

    20210406_041750.thumb.jpg.fd387a80c2f052231935f9b9c8f5accc.jpg

     

    On the left end of the desk from the picture above you can see the library of SyQuest EZ135 and SyQuest 200 removeable HDs. You can Also see the USB cable coiled up on the left that goes to the SIO to PC for the 8-bit.  It gets plugged in when needed.

    20210406_041803.thumb.jpg.4f705c198bd750701a4d020fd739c45f.jpg

     

    The next 2 stations to the left are the 8-bit station and the Intellivision station.  My daily driver 8-bit is a CSS 320XE with US+ OS/Standard OS/FIXXL OS.  I cannot say enough about this computer. I would rather use this over my U1M 130xe.  Attached to it is a Commodore 1702 Monitor, Black Box, 400 megs of HD Space (yes real spinning HDs), DUAL SIO to PC, Happy 1050, Standard XF551 and a 720k XF551.  The little tower (more details in this thread) to the left of the station has 400 megs of Winchester HD space on 4 drives and two Adaptec 4070s.  I also built the stand that the monitor sits on.

    To the left of that is my Intellivision station. Under the unit cover is a 2609A modified for component audio/video.  On top of the 2609A is the LTO Flash, a Multi-Cart for the Intellivision (Details here) To the left of that unit is an Intellivision flashback that has been modified to the Ultimate Flashback (details in this thread).

    20210406_041818.thumb.jpg.1d3e33b219673fe2c04d9fc853ae7507.jpg

     

    The next station to the left has a Mega ST and a Mega STE. The Mega ST on the left has the AdSpeed 16mhz upgrade with 4 megs ram and an ST to VGA video. Attached to it are the SyQuest EZ135 (still need a 3 1/2 faceplate) and a modified MegaFile 44.  The MF44 came to me with all the guts removed and an AdSCSI adapter installed in its place. I removed the 44 meg drive mechanism and replaced with it a 200 meg mech and added a SCSI2SD adapter on the second SCSI port (details for second port usage in this thread).  The SCSI2SD is configured for 4 1 gig drives and 8 500 meg partitions with one of them being the boot partition.  Man it boots fast.

    The Mega STE has a 300 meg boot drive and 4 megs ram and an ST to VGA video. Attached by way of a Link 2 are the SyQuest EZ135 and SyQuest 200 with an added SCSI2SD adapter installed in the second bay.  The SCSI2SD is configure for 4 1 gig drives and 8 500 megs partitions.

    20210406_041827.thumb.jpg.f50123463a571fcbf11db085cc4fa741.jpg

     

    You may have noticed that all STs have SyQuest EZ135s and SyQuest 200s attached to them.  This makes it easier to transfer files between them.

     

    One more thing to mention, The Atari and the Intellivision stations all have their own power strip to run those particular stations.  I do this so that only the station I am using has electricity running through it.

     

    • Like 4

  2. I use The Ultra Speed + OS from a 130xe I bought from CSS with it installed. It seems every disk I run is in high speed, whether it was formatted that way or not even when booting the disk (games and such) or just reading it.  That includes the special Atari formatted disks that seem to run faster even on original hardware.  I use Chipmunk and The Backup Master. Their copy programs run in highspeed. I have not tried it with the Happy software.


  3. On 12/5/2020 at 12:15 AM, ParanoidLittleMan said:

    Attaching SSD to Falcon ? That's good only for bragging - in reality it is nonsense. You need PATA-SATA adapter to connect it to Falcon IDE (what is still better than Falcon SCSI, btw.) 

    False!  You do not need an adapter to add an SSD to a Falcon.  This one connects directly to the Falcon cable, just like the Kingston I have in mine.

    Amazon.com: 32GB KingSpec 2.5-inch PATA/IDE SSD Solid State Disk (MLC Flash) SM2236 Controller: Computers & Accessories

     


  4. On 5/30/2020 at 11:34 PM, ParanoidLittleMan said:

    It (SCSI2SD) might be little cheaper than UltraSatan, but there is big drawback - you are limited to 1 GB because of Mega STE internal adapter. And now you will hardly find so low capacity cards.

     

    Nowhere in my post does it say that, you said it won't work with larger capacity cards. But, the way the above reads, someone could be confused about how large the capacity of the card can be.  I just wanted to clarify it.

    • Like 1

  5. On 5/30/2020 at 11:34 PM, ParanoidLittleMan said:

    It (SCSI2SD) might be little cheaper than UltraSatan, but there is big drawback - you are limited to 1 GB because of Mega STE internal adapter. And now you will hardly find so low capacity cards.

    Really hard to find now some older, working SCSI drive, all it gone bad because of age. 10 years ago was easy to find some in GB capacity range, now really rare, so prices gone high. And to work with MSTE internal adapter drive must support parity off mode, and that's rare. Mostly IBM drives were such.

    Just so you have correct information.  The Mega STE does have the 1 gig limit, but that does not translate to needing low capacity cards.  I am using a 32 Gig UHC 10 in a SCSI to SD on my Mega STE internally.

     

    Yes, only 1 gig is used, but as you see I can use larger cards to get that 1 gig.  The SCSI2SD utility allows me to set up "DRIVES" on any card. I have to limit the drives and capacity using the utility to make that 32 gig card look like just 1 gig to the ST.

     

    So any card will work with these, you just have to use the utility to limit it.


  6.  

    On 10/15/2020 at 8:10 AM, Xebec said:

    This is awesome!  How are you connecting these towers to the STs exactly?  can you attach it to a regular 'wedge' ST via ACSI port or similar?  

    for the Falcon and the TT it is a direct SCSI Cable. For other STs (including the 'wedge') I use an ICD Link 2 (SCSI to ACSI) on the same SCSI cable I use for the TT.  The Falcon uses a different cable.

    • Thanks 1

  7. Sorry it took so long.  But I am not able to visit the forums like used to be able to.

     

    Here is the set that was labeled 3.09.  Just recreate the disks and install.

     

    I do not have a floppy on the PC so I was not able to make .st files.

     

    I tested the install after I copied the files from the disks and re-created with blank disks.  I then transferred the files to the PC using the UIP Tool.  I then transferred back. re-created the disks and test the install again.  It all worked great.

    MWC v3.09.zip

    • Like 1

  8. If anyone was curious of what was in the box ....

     

    Original Disks

    Antic St: Tom Hudson's CAD-3D
    Arena
    Artic Fox
    Atari Falcon Disk 2 Extra Programs Rev D (3)
    Atari Language Disk, Mega and ST
    Atari Power Basic
    Atari Power Pack Afterburner
    Atari Power Pack: Organizer
    Atari Power Pack: Space Harrier
    Atari SpeedoGDOS Disk 1
    Atari SpeedoGDOS Disk 2 Rev A
    Atari St 1st Word (2)
    Atari ST Language Disk (2)
    Bloody Money

    Blow Up 3.0
    'C' Compiler v2.0
    Cal 6.3 (Desk Calendar)
    Calamus Clip Art Disk 1
    Calamus Clip Art Disk 2
    Calamus Clip Art Disk 3
    Calamus Clip Art Disk 4
    Calamus Clip Art Group 3 Disk 1
    Calamus Clip Art Group 3 Disk 2
    Calamus Clip Art Group 3 Disk 3
    Chaos Strikes Back
    Chaos Strikes Back Utility Disk
    Clip Master Disk 1
    Dbasic by Dtack
    Diskus 3.9
    Dr T's Music Software
    Dungeon Master
    Easel ST

    EdHak 2.37
    Emagic Support and Printer Disk
    Enchanter
    ExtenDOS 4.04
    Final Whistle
    Gauntlet
    GDOS Distribution Disk
    GDOS Fonts Epson FX80
    GDOS Fonts Micronis NB15

    GEM-View

    Geneva Master Disk v1.06

    Geneva Extras Disk v1.06

    GFA Basic
    GFA Basic 3.07
    GFA Basic fast 2 pass compiler
    GST Software: 1st Word Plus v2.02
    HD Driver 8.1 (2)
    Hippo-C
    Image Cat
    Laser C 2.1
    Laser C 2.1 Upgrade
    Laser C v1.1
    Laser DB v1
    Laser DB v1.1
    Lum-Tech Public Domain Disk 2
    Mark Williams C 2.1.7 Disk 1
    Mark Williams C 2.1.7 Disk 2
    Mark Williams C 2.1.7 Disk 3
    Mark Williams C 2.1.7 Disk 4
    Mark Williams C 3.0 Update Disk 1
    Mark Williams C 3.0 Update Disk 2
    Mark Williams C 3.0 Update Source Debugger Disk 3

    Mark Williams C 3.0 Update 3 Disks in a sealed package.
    Mark Williams C 3.09 Disk 1
    Mark Williams C 3.09 Disk 2
    Mark Williams C 3.09 Disk 3
    Mark Williams C 3.09 Disk 4
    Mark Williams C 3.09 Disk 5
    MichTron: Hisoft Basic
    Microsoft Write
    Modula-2 Compiler Disk 1
    Modula-2 Compiler Disk 2
    Music Studio 88

    NeoDesk 3.01/3.02/3.03 to 3.04 Upgrade

    NeoDesk 4

    NeoDesk 4 Icon Disk
    NVDI 2.5
    NVDI 3 Upgrade

    NVDI 4 Upgrade Disk 1
    NVDI 4 Upgrade Disk 2
    Passport
    People Places and Things Disk 1
    Personal Pascal Disk A v2
    Personal Pascal Disk B v2
    Pointing Device Drivers v7.1
    Premier Soccer v1
    Space Quest

    SpeedoDOS 5 Disk 2
    ST Action Games Disk #6
    ST Express Vol 2 No 1
    ST Format Cover Disk 18
    ST Format Cover Disk 72
    ST Log #12
    ST Log #13
    ST Log #14
    ST Log #36
    Start Vol 2 No 1
    Start Vol 2 No 2
    Start Vol 3 No 8
    Start Vol 3 No 9
    Super Cycle
    Teenage Queen
    The American Civil War Scenario Disk 1
    Word Writer 2.0
    Word Writer Dictionary
    Xboot 2.59

     

    Original Manuals

    Atari Audio Fun Machine
    Atari Multi TOS
    Blow Up 3.0
    NVDI 2
    NVDI 3
    NVDI 4
     

    • Like 2

  9. Thanks for the comments everyone! 

    @MasterMotorola No plans to add any of those.  Each computer that I will attach it too (there are many) has its own floppy.  The TT and Falcons have 1.44.  I believe my STE does too and 720k for the STs is just fine.  I have 1 Original ComosEX and 2 of the 3.0s so I probably will never get a Gotek or similar.

×
×
  • Create New...