-
Posts
109 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Everything posted by CosmicBoy
-
Not in German 🤦♂️
-
SID Master and all software packages by Marc Hull
CosmicBoy replied to Ksarul's topic in TI-99/4A Computers
No, i did not own ad Sid Master. -
SID Master and all software packages by Marc Hull
CosmicBoy replied to Ksarul's topic in TI-99/4A Computers
There is another one i own -> FPGASid -
SID Master and all software packages by Marc Hull
CosmicBoy replied to Ksarul's topic in TI-99/4A Computers
Has anyone ever tried one of the replacements like nanosid,swinsid or armsid. I already have an armsid and can try it then. -
SID Master and all software packages by Marc Hull
CosmicBoy replied to Ksarul's topic in TI-99/4A Computers
I want one -
Klaro, dauert aber etwas.
-
Oha ? Danke
-
The Disk could be the Diskmanager Software. I got one with my second CPS99. Btw. it comes with the original packaging i bill from the first owner
-
I have already done that. I used a working printerhead from a working printer and have the same print with the original printerhead. So i guess the printerhead works.
-
A few year later i got another CPS99 an did the same repairs. I installed a Gotek drive too Found some help here : http://99er.net/blog/blog/2016/05/06/using-a-gotek-floppy-emulator-with-hxc-on-my-ti-994a/ It is using the FlashFloppy Firmware (https://github.com/keirf/FlashFloppy)
-
Does anyone know how to fix a Thermal Printer PHP 1900. The printer is only printing 2 rows instead of the text (see picture) I used a different printer top/head from a working printer with the same effect so i guess the motherboard is not working. someone already had the same problem and was able to fix it
-
2 - 4 weeks are ok for me.
-
You can setup your own Bildschirmtext server and give it a try: https://github.com/bildschirmtext/bildschirmtext
-
Introducing APEDSK99: Arduino DSR shield / SD DSKx emulator
CosmicBoy replied to JJB's topic in TI-99/4A Development
I like the concept ? Is there a way to have 32k or SAMS memory and a harddrive (image-file on the SD-card)? -
Don't get me wrong. It was not my intention to produce and sell SAMS boards. I'm only interested to make the boards myself for me and a few other people as i did with TIPI&32K. I don't want to make profit !! I bought a lot of stuff at arcadeshopper in the past. But buying in the US is sometimes expensive for people from europe because of shipping and taxes. Its much cheaper to build stuff for yourself with good instructions like TIPI.
-
Will the design be public like TIPI+32K from jedimatt42 or is it only available through the store of arcadeshopper?
-
uhhh ... i missed this one 2x assembled 8MB boards for me
-
Me too
-
The state of TIPI and the Geneve 9640 - success-ish.
CosmicBoy replied to jedimatt42's topic in TI-99/4A Development
The design is open source so I want to build the board on my own without buying an expensive developer kid or cable to program the CPLD. -
The state of TIPI and the Geneve 9640 - success-ish.
CosmicBoy replied to jedimatt42's topic in TI-99/4A Development
Will this work only for updates or will it work for "fresh" CPLD also? -
I`m using the TL866CS ( see Post#53 )
-
I assembled my cart today. (Thanks to ralphb for one of his prototype boards) I used my TL866CS to flash the Atmega8515.
- 484 replies
-
- 12
-
Nice I orderd one from amgiakit.
-
I already tried this and the Geneve boots with a standart TI Controller. The regulators are ok. both 5V regulators put 5,2 out. I noticed that the u22 socket is empty - is this normal ? I think i replace the capacitors. i check that a the weekend, thanks for the hint.