Jump to content
Have You Played Atari Today?
2600|5200|7800|Lynx|Jaguar|Forums|Store

Madi

Members
 View Profile  See their activity

  • Posts

    428

  • Joined

  • Last visited

 Content Type 

Everything posted by Madi

  1. Madi
    There is an enhanced version of the Pokey Player at Atarimania (Right click and Save link as) Enhanced Pokey Player
  2. Madi
    Pokey Player II (Disk side A) SoftSide (1982-12) (1982-12)(SoftSide Publications)(US)[disk].zip
  3. Madi
    MENUTEAC.ATR Several programs inside
  4. Madi
    I cannot say for sure if the IC is 14 or 16 pin type. Any way if it is a 14 pin, it is most likely be 74LS04 Hex Inverter. Only need to use one gate (e.g pin 1 and 2). I am planning to make a cart clone for the sake of old days. Sure, it will be practically useless to use, since all 8 and 16 k carts are already hacked. Did not completely finished drawing it, but I will attach what I have if any one is interested. (hope to make a new topic for it one day)
  5. Madi
    Hi Robin It may be a little late to ask, but did you use eagle to rework the Gerber files? I am asking because I am trying make a minor changes on the board wiring. It is useless to import Gerbers to Eagle where import never complete correctly. Thanks Madi
  6. Madi
    As I posted earlier, I did not see any tracing in the said areas.
  7. Madi
  8. Madi
    Since there are no connections involved on both sides of the board, is this feasible? madi
  9. Madi
    Hi all, It seems that Atari VCS is finally launched. My relative has received an Atari VCS unit today. Is it worth it to buy one especially, it costs around 400 USD. madi
  10. Madi
    Edit: Deleted .. Same answer provided by @Rybags. madi
  11. Madi
    To clarify it, the picture has nothing to do with Arabian architecture or building style any where in Arabian peninsula . Have never seen such buildings in any Arabian land (desserts or forests). This is more of Indian style and to some extent a Persian (northen east). I believe it is an American type of story made by American cinematic world.? madi
  12. Madi
    Hi @Nezgar It is very kind of you to think of me. I did manage to fix my broken switch with superglue and applied a thin layer of epoxy. It looked ugly but works great. I can not thank you enough for your generosity. I will keep that in mind for future need. Indeed, this switch is so previous due to its rarity. Thank ounce again. Madi
  13. Madi
    There are some bios sets provided by some members. The sets are essentially the same except for some differences. We could make one collection to be standard. Hence, update to that collection will be much easier. madi Altirra Bios _by Serj list.rar Altirra bios_by Mclaneinc .rar Altirra Bios_by Scotty.rar
  14. Madi
    Welcome back.
  15. Madi
    Welcome back MrFish. Missed your inputs. Madi
  16. Madi
    Wish your tests turn OK.
  17. Madi
    osromv36.zip
  18. Madi
    The game button behaves normal during play. No noticeable delay. Altirra 3.90 test 17 - under WIN 10 x64 Did not test other versions/tests. madi
  19. Madi
    Is this what are you looking for?
  20. Madi
    Back to normal ? .. Fixed Thanks
  21. Madi
    The makers of 3d SIO plugs usually recommend this type of female pins madi
  22. Madi
    The new relese "Altirra-3.90-test15" crashes just after loading. No response. No error message. Once loaded it stays on screen for few seconds. The mouse pointer changes to blue circle. Then it vanishes. Edit : Both of Altirra.exe and the 64 version act the same. System Win 10 1903 - x64. Reverted back to test 14. (working version) madi
  23. Madi
    I am sure you have checked that the the video cable is connected to TV/monitor and tested with another device. Actually, it happened to me once ? Check monitor jack for broken traces. Use the generic RC connector with (Ch2 -3). Press START while turning the computer (cassette sound?) If there is no sign of life or even a blink after that, then it is a mystery to me since you had already tried the U1MB and UV boards. Good luck madi
  24. Madi
    I guess, you have a point here. Still I recommend that you keep rx-dx leds. I like the alternating light better. Any how I tried to remap the routing of the wiring. I cant say that it is 100% correct. Let me take this moment to thank you for the time effort and money you put into such projects and your kind welling to share your designs and tutorials with Atari community members. madi
  25. Madi
    I am having some difficulties tracing the pins of V5 board. It looks as if TX-RX led signals pins are switched out. This may be due to some mixed up in the routing. Can you clarify please? Thanks
AtariAge
Forums
Store
General
Follow AtariAge

Copyright ©1998-2023 AtariAge

×
×
  • Create New...