blacka013

Hi, where can you buy the Mega Speedy from? Regards

Hi TGB1718, did you contact Retrolemon to see if they would repair/replace your Netusbee? Regards

Jakub from Retro Lemon got Lotharek involved, and after I told them both lights were on whether the adsl cable was plugged in or not, they asked me to send it back for repair/replacement. See if they'll replace it if you've sent it back before. Worth a try. Regards

The Netusbee arrived on saturday, a nice shiny unit with a black PCB. I can now transfer files from my laptop to my STe, and the unit now recognises wireless keyboard and mouse. A great result. Thanks Jakub at Retrolemon for an excellent service. Regards

So, Netusbee returned to Retro Lemon for repair/replacement. Hopefully when it gets back I can use it for file transfer from a PC to my STe. 'll keep you posted. Regards

I've now been in touch with Retrolemon about the Netusbee, and I've had an email from Lotharek, and it now looks like this has to be returned for repair/replacement. Hope this doesn't take too long. Regards

Hi TGB1718, so checked the voltages at the power supply, 5V = 5.03V, 12V =11.94. So I think the PSU is ok. I think I will need to reseat everything on the motherboard and check voltages out at some of the chips. Still getting the strange problem of disk errors when using a different desktop. Most peculiar. Regards

Thanks for the info TGB1718. Can you remember how you adjusted the 5V supply from the PSU? I'll check what the 5V is. This could be the cause of another problem I've been having. I'm running Neodesk 4, and when trying to read/write to a floppy, I get an error about disk may be damaged. If I remove the hard drive and just use the inbuilt desktop, reading/writing is no problem with the same disk. I may need you to help me with detailed instructions on how to prepare a usb drive so I can transfer files between my PC and ST. My old Windows XP PC has died a death. Regards

Hi JamesWD, I've tried that and I still get the driver initialization failure. I have noticed with the STe switch on, I have both the green and orange LEDs on. I'm not sure that is correct. Regards

Hi TGB1718, doesn't the UIP program create the config file when first run? I've created a uip.cfg file as shown, but I get the following error message(see image). I did get this to work some time ago by connecting the STe to an old router and connecting wirelessly to my laptop, but nothing appears to be working anymore. I've tried plugging the ethernet cable straight from the netusbee into the laptop, but again not working. Regards

Hi all, does anyone have a manual on how to set up a usb pen drive, and use the UIP programme? Regards

Hi Darklord, thanks for the link, much appreciated. Regards

Hi, the link to Gribnif software appears to be broken, or the site is now defunct. Has anyone downloaded any of the software? Regards

Hi sideburn, any update on when you'll be getting the Ultra Satan back? Regards

I bought my 800XL, disk drive and software from him when I was stationed at RAF Lossiemouth. He lived in Elgin if I remember correctly.

Hi snicklin, Stuart Murray rings a bell in the dim and distant memories. Where was he based? Regards

Hi nasty niff, can you share the details of the company you've found olease? Regards

A Merry Christmas and a Happy and Peaceful New Year to you and yours Paul, and to everyone on Atariage.

Hi Sonny, have a look at this. NEW Atari 520 1040 ST STF STFM Mega ST computer 4MB Marpet memory upgrade kit | eBay Regards

Have you tried here? Atari EMMU CO25953 replacement - assembled (sellmyretro.com) Regards

Just zoom in on the image of the board, it's very clear.

I would also clean the solder side of the PCB and check the joints using a magnifying glass. Some are not very good.

Retrobecanes, Can you post photos of the board, and the oscilloscope traces, so we can see what you are getting. Regards

Hi, I've just tried this in Atari Win Plus 4.0, and it loads and runs the programmes when you select them. Regards

Hi TZB, wouldbe very interested to see the 3 OS setup you have in the drive. Regards