Jump to content

globeron

Members
  • Content Count

    1,257
  • Joined

  • Last visited

Everything posted by globeron

  1. (For the earlier games in the competition), i could not find my binder with scores in the past, but came along these around 1982. I found my score cards and even drew the hoonos of Munch-Man. Sent from my SM-A505F using Tapatalk
  2. Dear all, This is the Sudoku v1.0 solver my father (Peter van Kleunen) wrote in Extended Basic. Today I am going to show it at the Dutch TI-GG gathering. A nice story I just hear this week from a friend, he actually wrote the program for a Sudoku competition to find the solution, but apparently he surprised the organizer that for some there is not 1 solution, but 10! (I am not an expert), but here is the program included (auto start in XB) Related post: https://www.facebook.com/groups/ti99ers/permalink/10157471466244844/ SUDOKOPA.DSK
  3. Came along this book with BASIC Computer games. Sent from my SM-A505F using Tapatalk
  4. For our TI-LEGO City Moon Patrol fans. Sent from my SM-A505F using Tapatalk
  5. Champions course. TI. 25150 Sent from my SM-A505F using Tapatalk
  6. I see in the other link (competition) a score of 39400 which we need to beat! Sent from my SM-A505F using Tapatalk
  7. Is the cartridge the same as the .bin version 1.3b or other version? For Finalgrom /classic99?
  8. Contact Fred Kaal? Ti99-geek.nl see projects He is the author of the tool.
  9. I might be able to find that, is it a module or a dump on disk or standalone assembler? Sent from my iPad using Tapatalk
  10. I now also realise that the orange part is the interface for the Speak and Spell modules?
  11. 2* Speech in the box cards + Rave99 card + Other (no brand?) But it talkes when booting the PEB box. (actually based on this Gazoo and Tursi built Speech in the XB 2.7 Suite)
  12. Horizon 3000 + Rambo Need CFG384 and ROS384. 3* batteries NiCd are not working. Card occupies 1* slot, but because of the stacked chips the next slot cannot be used. (Maybe with the speech in PEB but need a cover for safety).
  13. Horizon HRD+ 8k*8 with Switch (works in both directions, battery is not working). Need to use CFG and ROSTICC.
  14. Foundation 128k card, with modded switch. Did not get the card to work yet.
  15. CorComp Floppy Disk Controllers with MillerGraphic Eprom. DS/DD And one card with LCC logo on screen chips Bank1 and Bank2 1x card is recognised in the system, but does not work with diskdrives? (Already tried swapping chips, no result)
  16. SNUG BwG FDC also changes the Titlescreen. Furthermore small TV (using Coax via Pal modulator for Video/Sound) And P-code cards
  17. On YouTube TI-99 VIDEOS uploaded several videos today. https://www.youtube.com/channel/UC7jwHlQfNTAKQ9WdKORAnpA Here are some pictures of all kind of hardware my father's PEB box system - Corcomp RamPlus 256/512k - Not sure which disk controller ( I read ATU and it looks different than a TI or CorComp Floppy Disk Controller DS/DD, if I can see it properly it looks like also a SNUG BwG (same type of chips), next to the FlexInterface card Also Mechatronic 80 Column card with V9938 video chip. Gramulator (uses same type of files like the GramKracker), devices are different. this one is in the 2nd system has the SNUG BwG DS/DD (next to the 32k card, better picture)
  18. On YouTube my channel TI99 VIDEOS has many videos related to emulating the TI ranging from MAME to Classic99
  19. Today I have been testing with 3x cards, finally I understand now how to get 2x to work (in the PEB box: 1x Flex Interface, 1x TI RS232, 1x Corcomp Disk Controller, 1x 32K and the Horizon for test): 1. Working HRD+ 8k*8 ram board (186kb), Use CFG and ROSTICC (it gives issues going back to XB Suite 2.7) 2. HRD3000 +RAMBO card and 12x 128k, with open SW4 pins and Dipswitch for CRU select (note because of the chips this board overlaps next PEB-slot a bit and only a card like a Speech can be mounted) Use CFG834 and ROS834 3. ** Issue with HRD3000, with SW4 On/Off and Dipswitch for CRU select, but the battery has been removed and piece of cable/diode, maybe that's the issue? If the HRD is on PowerOn boot, then it loads the cartridge automatically, e.g. Extended Basic and then loads from DSK1. or a Editor/Assembler. Or using the Extended Basic Suite 2.7 or FinalGrom all works. * During reset (FCTN-= QUIT) Press "SHIFT" to skip the PowerOn boot * Copy with DiskManager the file "MENU" to the HORIZON (DSK5.) to autoload the menu in Menu use FCTN-5 (BEGIN) to configure the menu items * Press FCTN-9 (BACK) to get the Titlescreen with the ROS details on it.
  20. Here is one TI + monitor https://www.etsy.com/listing/578311706/mini-texas-instruments-ti-994a-deluxe?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=TI-99&ref=sr_gallery-1-6&organic_search_click=1 Search on www.etsy.com on TI-99 and on https://www.thingiverse.com/ on TI-99 and Texas
  21. If you go to the GRAMSYST.DSK (in the .zip file, I also saw my disks are in the other .zip file provided earlier) there is a file called *GRAMHELP DIS/VAR, written in Dutch language that time, it helps a bit to understand the different file formats and *HEADERS of E.P. Rebel English: [email protected] Dutch: @GRAMHELP.txt @HEADERS.txt
  22. I think these are all the GramKracker files (my father has a GK), I used to have a GramCard, but the files can load. That time I tested it with the MESS emulator and GK, see the video. Disks - NOTE - the disks are 400k in size (for NanoPEB format), probably you need to copy them first to a normal TI-disk format (use TI Dir of Fred Kaal to do that) GRAMCARD.zip
  23. Do you search for this one power switch https://www.thingiverse.com/thing:3697972
  24. I believe there are more, I remember a yellow paper based print one for a graphical program (maybe TI Artist Plus, but not sure) Sent from my iPad using Tapatalk
×
×
  • Create New...