mickcris

Yeah, it would have been a bit more believable if they would have taken the time to do that. Might have taken a little longer to figure out it was an SNES inside.

In the pic, Its the cable on the left that looks like an snes video cable. the tv is sitting on top of that clear case the console is in.

the third game that they show playing is another SNES game http://www.snescentral.com/article.php?id=0115

I think with this image they just posted, we can almost guarantee its an snes https://scontent-dfw1-1.xx.fbcdn.net/hphotos-xlf1/v/t1.0-9/12742690_947514731984464_9103615071607895560_n.jpg?oh=c10cf47a9cc260c6228a2561092dd5b5&oe=57250893 has one of those junk 3 in 1 power supplies and looks like an Nintendo multi out connector

I doubt its artifacting. here is a comparison of the edge connectors http://imgur.com/a/LNChD

I took a pic of the top left corner of my SD2SNES to compare. http://imgur.com/a/4qD68 i would bet thats an snes flash cart

it does look an awful lot like that is an snes or snes clone shoved into the jag shell. the edge connector on the cart looks exactly like an snes cart and so does the cart slot. Im thinking you could probably fit an snes mini board into a jag shell. maybe its really an everdrive in that proto cart shell. the cart shell is only the front as you can see electrical tape holding the board in place.

It was the coleco guy selling them. he ended the listing after he fixed the picture for some reason: http://www.ebay.com/itm/Coleco-ColecoVision-Toy-Fair-brochure-in-hand-2016-/252282830338

lol. so that was the final version in the PDF. can see the misspelled "colecovison" on the cover of the ebay auction.

retroillucid posted the brochure that will be at the toyfair in a different thread http://atariage.com/forums/topic/248602-coleco-chameleon-what-you-think/?p=3437366 As someone else pointed out, they spelled Colecovision wrong on the 1st page. This is my favorite quote from it though: Here’s What The Experts Are Saying... “The creators of the ColecoVision are back with a new cartridge-based console!” I also like how they went totally vintage and their email address is @aol.com.

glad you are happy with it.

They wired it up so it switches the polarity as well as the tip size. I was not saying that the adapter Console5 makes doesn't work as I know it does. I was just answering you polarity question.

The turbografx16, white pc engine, and core grafx models are all center negative and will work with a genesis 1 power supply. The Turbo Duo/PC engine duo use a center positive supply.

craigm71, on 06 Feb 2016 - 1:02 PM, said: i forgot to say you need to order the plug adapter from the 2nd link, to turn the 5.5x2.1mm into a 6.3x3.0mm jack, as well as the power supply from the 1st link. so i'm re-posting this since i cannot edit. I posted this over at pcenginefx when someone asked this recently. You just need to get a supply that's center positive, around 9v, and 5.5x2.1mm tip: http://www.ebay.com/...S-/371135852564 http://www.ebay.com/...t-/131665973582 The power supply is probably ok, but its a cheap Chinese one FYI.

It's best to not assume if you don't know http://www.gamesx.com/wiki/doku.php?id=repair:pcepowersupplies

That power supply I liked to and the adapter is correct. The duo is center positive. No one ever said to use an AC adapter. You keep posting about stuff that you have no clue what you are talking about. I don't care what you do to your system concerning saves. I'm just saying that the tennokoe 2 saves would last a long time with 2 Eneloop rechargeables. You can also put a larger super cap in to make saves last longer than 2 weeks. Although I've never heard the 2 week thing or tested to see how long the stock super cap holds data.

I posted this over at pcenginefx when someone asked this recently. You just need to get a supply that's center positive, around 9v, and 5.5x2.1mm tip: http://www.ebay.com/itm/2A-AC-Converter-Adapter-for-9V-1-5A-Power-Supply-Charger-DC-5-5mm-x-2-1mm-US-/371135852564 http://www.ebay.com/itm/DC-Power-Plug-Jack-Change-Adapter-3-0x6-3mm-Male-to-2-1x5-5mm-Female-lot-/131665973582 The power supply is probably ok, but its a cheap Chinese one FYI. are you suggesting this for the turbobooster or tennokoe 2? With the tennokoe 2, you could just put a couple eneloops in there and it should last a very long time. With the turbobooster, you can also put a larger supercap in it to hold data longer. Would be easier than redesigning the circuit. If you are just doing it for fun though, thats cool. Not really sure why you would want a save on Nutopia to last for over 6 months. I know i would forget where i was in the game.

I thought it was more of a commonly used term or I would not have used it since it seems to have started a tangent. Must just be due to the industry I work in but its what pretty much everyone calls wire cutters. This is from that wikepedia page linked earlier: Diags or Dikes (a portmanteau of "Diagonal CutterS" is pronounced "dikes") – as in the phrase "a pair of dikes" or "hand me those dikes" – is jargon used especially in the electrical industry, to describe diagonal pliers. Dike can also be used as a verb, such as in the idiom "when in doubt, dike it out".

yes, the 1st one is on the Dreamcast

GDEMU doesn't use CF, it uses SD. I found this chart on google drive https://541cdc66d207c2c3c71a4ec5c4287a99dc354b4c-www.googledrive.com/host/0Byj31HzC9NxHVWxiTV90eWxOTTQ/

You should replace the thumb stick with an xbox 360 one. Makes it a lot better. http://www.instructables.com/id/Get-the-MAX-out-of-your-NES-MAX-Controller/ here is how to make that adapter: you could also put 2 DB15 sockets instead of NES ones if you wanted to use 2 famicom controllers.

it does resemble the head of a hammer head shark. They may have possibly planned on using the same peripherals at one point during the design. Cant really think of any other reason why the back molding of the case would be the same.

You can try to get one straight from mnemo. I dont really understand his ordering process though. http://3do-renovation.ru/How_to_buy.htm StoneAgeGamer looks to be sold out at the moment anyways. he used to require western union to pay, but not sure what he does now.

There are a couple of tabs, inside on the bottom, on the turbografx cover also that hold it on. they can easily break off and then it no longer stays in place. probably another reason a lot got thrown away. There are quite a few pics from different angles on this auction: http://www.ebay.com/itm/TurboGrafx-16-Black-Console-Only-Does-Not-Read-Games-For-Parts-or-Repair-/281918350628

I guess just the way you phrased your questions seemed more like arguing since both Black Tiger and me (who both have lots of knowledge about this subject) told you it would fit, and you just kept saying you didn't think it would. Its probably just a language thing though since you are from France. If you want to see pictures, a good place is ebay. there are lots on there and most of them are missing the back cover. lots of people just toss them when they connect something to the back. most pc engines are missing their covers for the expansion slot also.