Jump to content

vattari

Members
  • Content Count

    145
  • Joined

  • Last visited

Community Reputation

38 Excellent

About vattari

  • Rank
    Chopper Commander

Recent Profile Visitors

3,195 profile views
  1. To get all 3 resolutions, yes, that’s the way to go. Audio will need to go directly from the Atari to the display rather than via the OSSC because the VGA input (AV3) doesn’t have audio input. Sent from my iPhone using Tapatalk
  2. Plus one to this approach. This is how I did it (took a couple of days though) Sent from my iPad using Tapatalk
  3. I did order the remote with overlay. It’s by far the easiest way to navigate through the menus which you’ll do a lot of when setting this up Sent from my iPad using Tapatalk
  4. As long as you save it as a profile, you’re good to go each time. The image is sharp for all resolutions (I use 5x for colour and 2x for high res) Sent from my iPad using Tapatalk
  5. I was it with a SCART cable generally with the ST and an Amiga. I have one of the Chinese built ones (going by the price) plugged into a VGA / Audio switcher. In the switch, I have a Mega STE (via ST2VGA switch to allow all 3 resolutions*), TT and Falcon. All of them benefit of the OSSC’s line multiplier compared to the monitor’s scaler. * Some tinkering is required to tweak the image for high res. Sent from my iPad using Tapatalk
  6. As soon as I saw the device on the video, I knew this wouldn’t work unless the LCD accept 15khz signal via HDMI. I went down this path a couple of years ago after watching another YouTuber claim the same (he actually made a follow up video with the correction, but I had already made the purchase from China). Sent from my iPad using Tapatalk
  7. I’ll also add - the Retrotink is a line doubler. I definitely prefer the OSSC at 5x mode. Sent from my iPad using Tapatalk
  8. I have. I didn’t buy the Retrotink with the intention of using it with the ST (I already had an OSSC) but since I had a SCART>Component video converter, I tried the two together. The results were quite good. From memory, it worked out slightly cheaper than an OSSC only, but it’s a lot of cables and devices being daisy chained for the same result. Sent from my iPad using Tapatalk
  9. I agree. The Australian market, back in the day, made being an Atari ST owner difficult enough. Finding a user group, fellow users out in the wild, and even a newsagent that stocked your favourite ST magazine was a chore (but also exciting when you found one). A repeat of that would inevitably make its non-sustainable product again. Sent from my iPhone using Tapatalk
  10. Have you tried Disk 006 from the Automation Compacted Disks collection? http://steem.atari.st/automation.htm Sent from my iPad using Tapatalk
  11. As an alternative location for a Falcon PSU and VGA adapter, you can buy them from here, respectively: https://centuriontech.eu/product-category/atari/ http://gossuin.be/index.php/shop Sent from my iPad using Tapatalk
  12. As PLM pointed out, the Eiffel adapter is a good option. I use them on my Megas and TT. I recommend the ones being sold here: http://gossuin.be/index.php/shop Sent from my iPad using Tapatalk
  13. I just tried this on real hardware (firstly I must say, this is brilliant rework of the original) but found it was more difficult to collect the lantern highlighted in the screen below. Sent from my iPhone using Tapatalk
  14. To me, number 3 looks like he could getting away with singing Jailhouse Rock. I think #6 matches the photo the best. Sent from my iPad using Tapatalk
  15. I can confirm 3.1 works fine though Sent from my iPad using Tapatalk
×
×
  • Create New...