Vectral_Gamer

And the number is 812-870-6883 I would text them because for some reason theres no voicemail but there cheap and so a good job so I'd text them or message them on he website because they helped my with my atari 5200 and a joysrick I think they do all Ataris though

http://vectralrepair.wix.com/vectralrepair

Hey I don't know if this will help anyone but it would be nice if it did I needed help with an atari has it's joystick and no one here seemed a to be able to help so o looked online and found this great website

I have two joysticks, and they both work. However, on one the joystick is really has to move. Suggestions? I will post pic

It worked! I got the new power supply, Hooke it up, and vóila! It's working! Donkey Kong, here I come! Thanks everyone who posted, especially you Gribble

Alright well I'll order one and hope that works. But my friend says he ran it off that Sears power supply

http://www.amazon.com/3rd-Party-Power-Adapter-Atari-2600/dp/B00469YOFI Is this what I need?

Ok thanks I'll try that

Here you go

I don't know what to try next. I know it's not the switch box/ rca cable, i tested the chips as best I could, I cleaned it. What does that leave? Soldering and power?

I don't know much about the power supply but I thoufht Atari had a special console just for Sears that was the same as the Atari 2600

I plugged the cable from the motherboard directly into the adapter then into the tv

Bad news: adapter didn't change anything. Still the same blank screen

And I thought thre sears telegames was just a rebranded Atari made especially for Sears?

Ok well I'm going out with my family today so I'll run by RadioShack then hopefully it's pretty cheap only 3-5$

Ok thanks well I will go buy one tomorow it's getting late where I am and I will get back to you on whether or not it worked

Ok so I should purchase an adapter or does what I have work?

I have this but I don't think it's the same although I wouldn't know

Ok then yes official and yea I'm using the switch box but I might have an adapter

Here

Actually here's a picture of the setup he used

Power supply says seats telegames so universal? Also I tried on channel 3 will go to channel 2 and check. And I'm using and adapter

The tv hums, Im not sure if I'm using power supply or universal, how do i check that? And I cleaned the contacts and all my games.

Basically, a friend ofine had a broken Atari and thought maybe I could fix it. So I have been working on it and so far when I turn it on with no cartridge on it black screens with a humming sound. However, with a cartridge in, it does the same. Please help