dafa_123

Look here: https://archive.org/details/MAME_0.197_Software_List_ROMs_machines-bios-devices I found it here.

Got it. Thank you

Anyone have the ECS bios files required in MAME? ecs_rom.20 ecs_rom.70 ecs_rom.e0 Thanks.

Could it be the BIOS file I am using? Any chance you could send me yours? Thanks.

Hello, I am trying to get the Sega Saturn to work on Mame. I have a working ISO image that I tested in SSF and Yabause and it works, but I always get the message "Unsuitable disk" or something when I start with MAME. The emulation starts, so I don't think it's a Bios issue. As anyone got it to work? Thanks.

Hello, Does anyone know the default key mapping in Mame for all the buttons of the Atari 5200? I have found a few, but some of them I can't seem to find. Thanks.

I think I will go with the A/V Mod option. It will be simpler. Thank you for all your help, it was really helpful. You guys know your stuff! Daniel

Ok, so I fiddled with the both alignment screws with no luck. I get 4.86V on the audio chip. When I connect the audio directly on the solder point mentioned, I get clear audio. It would appear that the RF module is faulty. Is there a way to repair the RF module? I could also replace the RF module or put in a A/V Mod chip. What do you guys think? Thanks. Daniel

Hello, I have a Colecovision that when I put the power on, I get a continual hissing sound. The image is good, but the sound is just a hiss like when you put a TV on a channel with white noise. I checked the PSU and it is good, same with the RF cable. I cannot see anything wrong visually on the board. The sound is also present even if there is no cartridge inserted. At the moment I am suspecting either a bad RF module, memory module or CPU. I have attached a sound file. You can hear a change in pitch when the blue screen appears for # of players and difficulty. Anyway I can easily test to figure out what is wrong? Thanks. Daniel Recording_1.zip

Thanks. Unless someone comes up with a trick to solve the issue, I think that I will simply order a new mod from Coolretroprojects. When I eventually get it, I will simply replace the old mod. Daniel

It's a Mod I got from Ebay a while back. I don't remember from who. Here is a picture. I recently ordered a Coleco Mod from http://www.coolretroprojects.com. I did not received it yet. Anyone knows if they are good? Thanks. Daniel

Hello, I have installed a composite AV mod on my Intellivision and in some games the screen won't stop shaking for some reason. The title screen is Ok, but when I start the game the screen just shake a little all the time. Not all game do this, only a few... Any ideas how I could fix this? Thanks.

24 copies left.

I put a foam with a cut out for the overlays so that they fit inside. The overlays are in a small ziplock bag inside. The new boxes are the same quality as the homebrew boxes. That is one of the reason I have to sell them at a higher price than the first batch since the boxes cost alot more to produce. On the other hand, they really look great.

Yes, but I have included shipping in the price. The original boxes from the first batch was homemade and not as nice. The new boxes look great and are much better but cost more to manufacture unfortunately.

27 sets left.

At the current exchange rate, approximately $80USD. The price includes shipping to the US.

For the folks in Italy. I can get two type of shipping. 1- Air mail with tracking would be an extra 35$ Canadian. 2- Air mail no tracking would be an extra 20$ Canadian (I do not recommend shipping without tracking) Estimated delivery for both option is within 9 work days. Thanks

Hello, I have made 50 set of overlays for the Intellivision CBS Electronics series of games. I would like to offer them here before I go to auction them on Ebay. This is the second generation of these overlays. I only made 5 sets of the first generation and sold a few on Ebay last year. The boxes and overlays have the same quality as the homebrew games. This will be the last batch that I make for the Intellivision CBS Electronics series. There are 8 pairs of overlays, 1 pair for each game of the series, for a total of 16 overlays per box. I am selling them at 100$ Canadian including shipping to Canada and the US. International buyers, please ask for a shipping quote. I Only have 40 sets left, so I will be offering 35 sets here and auctioning 5 sets on Ebay later. If you are interested, send me a private message with your email, shipping address and quantity. I accept Paypal or Interac transfers, please specify payment method in the message. I have attached the pictures to this post. Let me know if you have any questions Thank you.

Hello everyone, I have been trying to get in contact with Roger Matthews to see if he could provide me with high resolution images of his overlays. Since there are no longer available and the price on Ebay for a set is ridiculously high, I was hoping to print them myself. Anyone knows how to get in contact with him? Or does anyone have high resolution images of the overlays? Thanks.

Hello, If anyone wants to sell a CIB Learning Fun II or Sears Backgammon let me know. I am willing to pay a fair price for the games. Thanks

That's what I thought. Thanks guys

Quick question for you guys. Does anyone actually buy the VGA rated games at crazy high prices like this one? http://www.ebay.com/itm/Tron-Deadly-Discs-Mattel-Story-Book-Cover-Intellivision-1982-First-Print-VGA-/112108873782?hash=item1a1a35a836:g:besAAOSwezVWv4JR Just curious...

Can we reserve copies?

I want a copy