Jump to content

motrucker

Members
  • Content Count

    281
  • Joined

  • Last visited

Posts posted by motrucker


  1. I remember seeing a demo of the Spartan at our old Commodore User Group, in about mid 1986. It had all of the updates, and even had the 1541 board. Very interesting bit of hardware, if some what expensive. It did a very good job of running Apple ][ software, although IIRC they could not get the 1541 to work 100%. It took so long to be released, it was being referred to as vaporware back then.

    Here are some more thoughts on this add on;

     

    https://www.lemon64.com/forum/viewtopic.php?t=44617&start=0

     

     

     

     


  2. RetroTink seems to work quite well,  at least on the Commodore 8 bit machines;

     

    https://www.retrotink.com/

     

    There's also this option;

     

    https://www.ebay.com/itm/Extron-System-7SC-System-Switcher-Integrated-Video-Scaler-Tested/383045902383?hash=item592f50a02f:g:ztsAAOSwd2JdKIpF:sc:FedExHomeDelivery!21037!US!-1

     

    The Extron scalers work very well too, even if they are older technology. The Extron DVS 204 Digital Video Scaler should also work

     

    Here's another thread from Lemon64;

     

    https://www.lemon64.com/forum/viewtopic.php?t=68065

     

     

     


  3. While the SD2IEC can be a handy addition, I would recommend getting a real disk drive too. Get a 1541 II to avoid the problems of the old 1541. The reason is simple, there are loads of programs that will not work with the SD2IEC. Having a real drive in your system will guaranty all your software can be used.

     

     


  4. On 7/2/2019 at 2:09 AM, carlsson said:

    PAL/NTSC usually is not an issue for 90+% of the VIC-20 library. A few of the Imagic and Sirius cartridge games, plus possibly modern homebrews trace the raster beam so it becomes an issue.

    As for memory expansions, here are a few links:

    https://www.ebay.com/itm/163235793637 (Texas/US, $30 + shipping $4.94 to your destination)

    And yes, the Shift/Lock is mechanical so it should remain down when pushed.

    That link is to aaascrapdogsunlimited  which is run by good people. I can highly recommend them - very good stuff that they make - and great to work with.


  5. 7 hours ago, panamajoe said:

    Never had a C64 back in the day and just recently bought one. While i´m of course impressed with the amount of software/ games available and especially with the quality of the homebrews i´m really a bit shocked by the piss-poor built quality of the Commodore itself:

    - cardboard shilding? really?

    - heat problems 

    - power brick is more of a fire hazard than anything else + it´s glued together (!)

    - and that disc drive is slower than a dead dog

     

    So: is there anything i can do about the heat problems and about the terrible power brick? Bought a Epyx Fastload Cart already to get that disc drive spinning...

    If you think the C-64 is such a bad computer, why in the world did you buy one? Since so many have lasted thirty five years, I wouldn't be to hard on them.

    To address the heat problem, just remove the cardboard "RF shield", and maybe add a couple of heat sinks (to the PLA and VIC chips). That will work wonders.

    The Epyx Fastload is good for speeding up disk access, but there are a lot of other options from Jiffy DOS to a Warp Speed cartridge. Jiffy DOS has the advantage of leaving the cartridge port empty for other use though.

     

    • Like 2

  6. 8 hours ago, carlsson said:

    Ironically the VIC-20 was more or less commercially dead by April 1985. I think the reason COMPUTE! published versions for both machines is they still were popular and similar enough to warrant a version each, otherwise readers would complain.

     

    I don't know about Sears or K-Mart, though generally VIC-20 collectors rarely speak about original disk software back in the days. Were those compilations, user group disks packaged for sale or original software? I could imagine something in the line of 5-10 disk titles, though you seem to indicate there were far more available for the VIC.

    I am referring to to games from the original publishers. You sure wouldn't ever see user group disks packaged for sale in a retail store here.

    VIC 20 commercial disk games were no where near as prolific as C-64 games, and I don't mean to infer that, but they were there, at least in this area.

    Programs on tape just weren't very popular here, for the C-64 or the VIC. Cartridge based games are another story.....

     

     


  7. On 7/8/2019 at 6:01 AM, OLD CS1 said:

    Not certain about common, but for the short time I had a VIC I had a 1540.  I do not recall a lot of commercial titles on disk, though.  There were some at K-Mart and Target, but mostly I remember cassettes and cartridges for the VIC.

     

     

    In this area Vic 20 software could be purchased from places like Sears, K Mart, etc., on disk, or computer shops that supported the 8 bit market. We had a "super store" for CBM stuff called Buried Treasure in Rockville (just out of Washington D.C.).

    There were fast loaders for disk drives for both the C-64 and Vic 20. Compute! Magazine ran a type in program for both machines. A quote from Wikipedia on this;

    "Several popular Commodore magazines published type-in fast loading software. In April 1985, Compute! published TurboDisk, a fast loader that included C64 and VIC-20 versions. This program proved popular and was republished in the July 1985 issue of Compute!'s Gazette.

    It was printed yet again in August 1986, without the VIC-20 version, but with several accompanying utilities to relocate the program in memory and to create auto-booting software that took advantage of TurboDisk's speed. A Commodore 128 version was also included for those C128 users who still had 1541 disk drives."

     

×
×
  • Create New...