francouai

need to find someone to be able to fix 3 Lynx2 motherboards... or at least do 1 working with the 3

This morning, I have connected +5volts on C41. I'm getting White screen but no activity (no picture/sound)

sound good. If no power up on C41, what can be to problem ?

Hello guys, I recently bought two brand new boxed Atari Lynx 2. But with dead condition. (no boot, no screen, no LED, no noise, NOTHING!) I changed all Caps, MOSFET Q12, Zener diode D13, Transistors Q7/Q8 and R78 Resistor. I was very confident after the work... But all these changes did not fix the dead condition. The controller ribbon looks fine, I also did a short cut on PIN 6/7 to avoid any ribbon problem.. Any idea what to change will be great.

I don't connect back this ribbon once my work is done on the motherboard. just do a shortcut on PIN 6/7 to power On the lynx and check if it works fine. One all good, I cut out 1 or 2mms from this *** ribbon and I connect it back (for ever!)

Since it is VERY FAST, I'll need the new model! Any pre order somewhere.

I received mine as well. fantastic !!! thank you so much! LYNX2 + LCD + RETROHQ =

SainT, congrat' ! That's the BEST system ever seen for the Lynx. All others cards are rubbish.

there is so few games for FALCON only. I tired road riot 4WD (works only with the FALCON/JAGUAR pad) and it is too hard very unplayable. According to the atari.8bitchips.info webage: playing with Test Drive on FALCON is ridiculous.

I jumped +5V from the box input to pin 16 on the backside of the SCART connector to force RGB mode. PIN16 is cut and do not go to the SCART connector. Work very fine with my STE and FALCON to my SAMSUNG BX2450 LCD. this box cost nothing on Amazon and it is the BEST solution.

Please add me to the list for a cased version. Thanks! Or PM me for details.