Lynx2 No Boot

[Lynx2 No Boot]

need to find someone to be able to fix 3 Lynx2 motherboards...

or at least do 1 working with the 3

[Lynx2 No Boot]

This morning, I have connected +5volts on C41.

I'm getting White screen but no activity (no picture/sound)

 

[Lynx2 No Boot]

sound good.

If no power up on C41, what can be to problem ?

[Lynx2 No Boot]

Hello guys,

I recently bought two brand new boxed Atari Lynx 2.

But with dead condition. (no boot, no screen, no LED, no noise, NOTHING!)

I changed all Caps, MOSFET Q12, Zener diode D13, Transistors Q7/Q8 and R78 Resistor.

I was very confident after the work...

 

But all these changes did not fix the dead condition.

The controller ribbon looks fine, I also did a short cut on PIN 6/7 to avoid any ribbon problem..

 

Any idea what to change will be great.

[Atari Lynx 2 Controller Ribon]

I don't connect back this ribbon once my work is done on the motherboard.

just do a shortcut on PIN 6/7 to power On the lynx and check if it works fine.

One all good, I cut out 1 or 2mms from this *** ribbon and I connect it back (for ever!)

 

[Lynx Multi Card Preorders]

Since it is VERY FAST, I'll need the new model!

Any pre order somewhere.

[Lynx Multi Card Preorders]

I received mine as well.

fantastic !!!

thank you so much!

 

LYNX2 + LCD + RETROHQ =

[Lynx Multi Card Preorders]

SainT, congrat' !

That's the BEST system ever seen for the Lynx.

All others cards are rubbish.

[School Me on the Falcon.]

there is so few games for FALCON only.

I tired road riot 4WD (works only with the FALCON/JAGUAR pad) and it is too hard very unplayable.

According to the atari.8bitchips.info webage: playing with Test Drive on FALCON is ridiculous.

[Falcon SCART/RGB to HDMI]

I jumped +5V from the box input to pin 16 on the backside of the SCART connector to force RGB mode.

PIN16 is cut and do not go to the SCART connector.

 

Work very fine with my STE and FALCON to my SAMSUNG BX2450 LCD.

 

this box cost nothing on Amazon and it is the BEST solution.

[Lynx Multi Card Preorders]

Please add me to the list for a cased version. Thanks!

Or PM me for details.