Milli V

You can remove the labels with a hair dryer and patience - On FaceBook I have some pix on how this is done: https://www.facebook.com/groups/115531017844/

Well I am selling a very nice one http://www.ebay.com/itm/222150790446?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Try: 1. look at keyboard plug and computer plug, make sure none of the wires are crossed or bent out of place 2. plug keyboard in left side to adam net - eliminate the possibility of bad front connector.

Here is the keyboard information http://smartbasic.net/2015/11/24/replacement-adam-keyboard-cable/

Using an original copy of CP/M I formated a disk and then did a SYSGEN to write the system on this disk. I did the same with the DDP that I got from that coleco executive that says has revision 1.7 hand written on it. I then made a disk image of both and comparing them byte byte there is a difference between the release version (left) and this other version (right) . This is the boot track. Deeper in are even more changes

Forgot picture

Never heard of this - found manual in an Adam collection I just purchased

Hi Guys - I have a youtube channel where I show how to restore and repair old computers if you are interested. I just posted a video on repairing a digital drive Milli

This is the hardware prototype for the Adam Virtual Device, AViD. After completing the proof of concept by communicating with an Adam Keyboard via this software adjustable baud rate USB-RS232 adapter and custom circuits that handle the conversion from 2 wire to single wire communication I have created the prototype of AViD and now move on to the next stage, talking to a real Adam. Once this is complete then I will write the software to allow a PC to be used as a virtual disk drive on a stock, unmodified Adam. AViD is shown with a keyboard cable plugged in but will use either a keyboard cable or an Adam Net cable.

Your welcome - I'll post the actual files online later

I was going through some disks I got with an Adam and one was labeled AdamCon IV pictures - I opened them in PowerPaint - Not sure if they were taken with the Adam or they are from something else. Recognize anyone?

On FaceBook one person said this: "If it is ROM then I would strongly suspect a capacitor, and it fits the look of a power plane capacitor."

I was working on a an Adam today and cam across this under 2 of the Smart writer roms. I looked in a Expansion #3 and it had 1 under a rom. On Facebvook we cant figure out what it is

I am going to be testing it on XP, Win7 and Win 10 - right now the test code is running in a dos window on windows 7 (freebasic) but I will eventually move it to a windows gui program when I get closer

I had thought about it - but I wont be able to attend it unfortunately - I may have it ready by then though

I am surprised to but not dissuaded

Very true

I have done a write up on the status of AViD on my site. Anyone who can help with information please give it a read. Thanks http://smartbasic.net/2016/05/26/avid-my-current-project/

http://r.ebay.com/ldJ4Gb

http://r.ebay.com/pZm3X7

3 hours left

Cool idea

I haven't had an issue - but in use a LCD screen